Leather Strop Sharpening Polishing Compounds 3 One Oz. Bars (One of Each);

Our compounds are made from abrasive materials surrounded in a matrix of binders.

What is Compound Used for?
Our compound is used for sharpening knives on a strop and polishing metals.

What can I use sharpen?
Woodworking Chisels
Straight Razors
Utility Knives
Hunting Knives
Folding Knives
Fillet Knives
Kitchen Knives
Chef's Knife

How does it work?
The compound works by realigning the very fine edge of the blade and polishing the blades surface. After use or sharpening the blade will have a slight burr this burr is what catches when you attempt to cut. If the blades edge is aligned the blade passes through with little effort. By stropping with the compound the knife the very fine edge of the blade will begin align, while the compound polished the edge.

How do I use it?

Step 1: Apply the compound by rubbing it onto a leather strop. The simplest way to describe this process is like coloring with a crayon, back and forth with light pressure.

Step 2: Cover the entire leather surface with the compound.

Step 3: Place the blade on the leather. The cutting edge should be near the edge of the leather. Adjust the angle of the blade by raising the spine (The back of the blade where it isn't sharp) slightly creating a wedge with an angle of around 15 - 30 degrees.

Step 4: With light pressure push the blade up towards the top of the strop.