Specification:
Interface: 3PIN
Power Supply: 5V
Size: 30x 24x 1.6mm
Weight: 25g
Electrical characteristics:
Transformation coefficient: 1000:1
Input current: 0--5A
Output current: 0--5mA
Sampling resistor: 200Ω
Sampling voltage: 0--1V
Working frequency: 20-20000Hz
Working temperature: -55--85℃
Dielectric strength: 6KAC/1min
Package Include:
1* Analog Current Meter Sensor Module Board
If you need detail schematic, please contact us
- Analog Current Meter Module. Transformer can only sense AC
- This electricity sensor is based on TA12-100 current transformer, which can transform AC signals of large current into small amplitude signals.
- 3-wire electronic block interface, input 5V - GND. S pin is the output analog voltage value.
- You can use jumpers to select the parallel output of the output to adjust the range of analog values that are output.
- On-board 3P and 4P connecting interface for current signal output can be easily connected with your MCU development board
- Analog Current Meter Module. Transformer can only sense AC
- This electricity sensor is based on TA12-100 current transformer, which can transform AC signals of large current into small amplitude signals.
- 3-wire electronic block interface, input 5V - GND. S pin is the output analog voltage value.
- You can use jumpers to select the parallel output of the output to adjust the range of analog values that are output.
- On-board 3P and 4P connecting interface for current signal output can be easily connected with your MCU development board
