Premium quality MIG welding gun package M-100 or M-10 (100Amp)/M-150 or M-15 (150Amp)/M-25 (250Amp) with 10-ft (3m)/12-ft (3.7m)/15-ft (4.6m) cable. Ideal replacement for Miller Millermatic M series or Hobart H series MIG gun torch stinger. Works with Miller/Hobart machines: M-100/M-150 (100A/150A): Sidekick, Cricket, Millermatic 35/90/120/130/130XP/135/140S/175/180S/DVIs/Challenger/Challenger 172/185/Passport/Passport Plus/Pulser; M-25 (250A): Millermatic 200/210/212/250/250X/251/252/Vintage; Also works with many models of Hobart Handler and IronMan welders. (Check you user manual for compatibility).Miller referenced part number: M-100: 248282 (10-ft); M-150: 249039 (10-ft)/249040 (12-ft)/249041 (15-ft); M-25: 169594 (10-ft)/169596 (12-ft)/169598 (15-ft).See all listed pictures for part details. Check your welder's user manual and existing mig gun for front-end consumables as well as rear plug/control line connector for compatibility.
- Premium quality 100-amp/150-amp/250-amp with 10-ft, 12-ft and 15-ft cable air cooled MIG welding gun, ideal replacement for Miller MIGmatic M-series. Control cable is with 2-pin Amphenol type terminal.
- M-series MIG gun M-100/M-150/M-25/M-40 can be found in many Miller machines like Millermatic, DVI, Passport, Challenger, Pulser, Vintage or Hobart IronMan, etc. See all listed pictures for details of front consumables, rear plug and control cable type. CHECK YOUR WELDER MANUAL FOR MATCHING.
- Referenced part number from Miller: 248282 (M-100/10-ft); 249039 (M-150/10-ft); 249040 (M-150/12-ft); 249041 (M-150/15-ft); 169594 (M-25/10-ft); 169596 (M-25/12-ft); 169598 (M-25/15-ft).
- Front consumables come with 000068 (0.035") contact tip, 169715 (M-100/M-150) and 200258 (M-25) nozzle, 169716 (M-100/M-150) and 169728 (M-25) gas diffuser, 169729 (M-25) nozzle adapter and 194011 wire liner. Current rating: 100A, 150A and 250A; Cable length: 10-ft, 12-ft and 15-ft. Control cable terminal: 2-pin Amphenol type.
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
- Premium quality 100-amp/150-amp/250-amp with 10-ft, 12-ft and 15-ft cable air cooled MIG welding gun, ideal replacement for Miller MIGmatic M-series. Control cable is with 2-pin Amphenol type terminal.
- M-series MIG gun M-100/M-150/M-25/M-40 can be found in many Miller machines like Millermatic, DVI, Passport, Challenger, Pulser, Vintage or Hobart IronMan, etc. See all listed pictures for details of front consumables, rear plug and control cable type. CHECK YOUR WELDER MANUAL FOR MATCHING.
- Referenced part number from Miller: 248282 (M-100/10-ft); 249039 (M-150/10-ft); 249040 (M-150/12-ft); 249041 (M-150/15-ft); 169594 (M-25/10-ft); 169596 (M-25/12-ft); 169598 (M-25/15-ft).
- Front consumables come with 000068 (0.035") contact tip, 169715 (M-100/M-150) and 200258 (M-25) nozzle, 169716 (M-100/M-150) and 169728 (M-25) gas diffuser, 169729 (M-25) nozzle adapter and 194011 wire liner. Current rating: 100A, 150A and 250A; Cable length: 10-ft, 12-ft and 15-ft. Control cable terminal: 2-pin Amphenol type.
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question.
