Mount Factory Articulating Tilting TV Wall Mount For 40 in. - 65 in. TVs;

This articulating, tilting TV wall mount is for LED, LCD, Plasma and other flat panel displays measuring between 40 - 65 inch diagonally. The mount fits many sizes and supports VESA mounting standards of 100mm x 100mm, 100mm x 200mm, 200mm x 200mm, 300mm x 300mm, 200mm x 400mm, 400mm x 400mm, and 400mm x 600mm. The easiest way to ensure fit of the mounting pattern is to find out the VESA pattern for your panel either online or by measuring between the screw holes on the rear of the TV or panel (100mm is about 4 inches). They should be no more than 24 inches apart horizontally and up to 15.75 inch vertically. Mount compresses to 3 inches and extends up to 17.5 inches from wall. Articulating arm will also allow for offset mounting, where the panel (when extended out on the arm) can be shifted horizontally up to 12 inches left or 17 inch right. Features easy installation: simply mount the separate arms to the back of your TV, then mount the back plate to the wall, lastly lift the panel onto the back-plate and tighten the security bolts, locking the TV into place. Also allows you to adjust the display level after the mount has been placed on the wall, allowing you to achieve an absolutely perfect and level installation. The back plate features integrated stops, which protect the TV from moving horizontally off the mount. Specifications: Fully rated for up to 110 pound displays; Tilts from 0 degrees (vertical) to 12 degrees (down/forward); Swivels up to 90 degrees; RoHS, CE, and ISO-9001 certified; Complete mount package includes pre-assembled, 12-gauge powder-coated, heavy-duty steel mount, installation instructions, and full hardware package with stud wall screws, masonry anchors, mounting screws, washers, and spacers.