Replacement DiaphragmFor Flo Pro Series Valves
- Turn off the water supply
- Unscrew the valve bonnet from the valve body
- Remove the valve bonnet assembly and spring
- Gently pry the diaphragm out of it's seat
- Flush out the valve body and seat with clean water
- Press in a new diaphragm
- Replace the spring and the valve bonnet
- Tighten the screws or the hold down ring
- Turn on the water
- Check for leaks
- Turn off the water supply
- Unscrew the valve bonnet from the valve body
- Remove the valve bonnet assembly and spring
- Gently pry the diaphragm out of it's seat
- Flush out the valve body and seat with clean water
- Press in a new diaphragm
- Replace the spring and the valve bonnet
- Tighten the screws or the hold down ring
- Turn on the water
- Check for leaks
