OEMTOOLS 24503 Multipurpose Drill Powered Pump, Orange

The Drillpump300 is designed to work with most electrical drills with a maximum speed of 2, 800 RPM. This pump is ideal for draining small ponds, fish tanks, small Pools or even a flooded basement. The hose connection is 1/2â‚¬Â and uses any 1/2â‚¬Â hose. The unit pumps up to 300 gallons per hour and is self-priming up to 9 feet. The 3/8â‚¬Â shank on this unit fits all common chucks for most drills.

it is recommended to use a common lithium grease. To apply, unscrew the side and put a bit of grease on the housing where the rubber Fan blades touch, then reassemble.

Drill Pump will not turn by hand, this must be chucked to the drill
Drill Pump must be mounted for proper usage, do not hold in hand
Pumps up to 300 gallons per hour
Self Priming up to 9 feet
After every use, apply a small amount of silicone grease. (see instructions below)
NOT TO BE USED WITH POTABLE WATER
Drill Pump will not turn by hand, this must be chucked to the drill
Drill Pump must be mounted for proper usage, do not hold in hand
Pumps up to 300 gallons per hour
Self Priming up to 9 feet
After every use, apply a small amount of silicone grease. (see instructions below)
NOT TO BE USED WITH POTABLE WATER

Top WaffleMaker Reviews

Milescraft 1313 DrillPump300 - Self Priming Water Transfer Pump;