Double Metal Punch (1.5mm and 2mm) - LPUNCH1;
Double Metal Punch (1.5mm and 2mm) - LPUNCH1

Instructions: Put a mark on the metal piece to indicate the desired hole location. Select hole size, align the mark with the pin Rotate the pin handle clockwise until metal is completely pierced Rotate the pin handle counter...

Buy Now From Amazon

Instructions: Put a mark on the metal piece to indicate the desired hole location. Select hole size, align the mark with the pin Rotate the pin handle clockwise until metal is completely pierced Rotate the pin handle counter-clockwise to release, remove your piece. Its that easy!

  • Metal Hole Punch, Punches two different hole sizes, 1.5mm and 2mm
  • Punch up to 16 gauge metal,
  • Has a 3/4" reach meaning you can punch a hold 3/4" from edge
  • Easy to use, should you ever need replacement pins, they are available (sold separately)
  • Beadsmith, LPunch1---Made of Carbon Steel with durable heat treated pins
  • Metal Hole Punch, Punches two different hole sizes, 1.5mm and 2mm
  • Punch up to 16 gauge metal,
  • Has a 3/4" reach meaning you can punch a hold 3/4" from edge
  • Easy to use, should you ever need replacement pins, they are available (sold separately)
  • Beadsmith, LPunch1---Made of Carbon Steel with durable heat treated pins

Similar Products

Dapping Block Wood + 2 PunchesImpressArt 1 Pound Metal Stamping HammerImpressArt Design Stamps, 3mm, Whimsy Heart, 1-PackUltra-polish Pads, 20 PackBeadsmith-Vintaj Steel Bench Block, 4 by 4 by 0.5-InchBeadaholique Solid Metal Bench Block Wire Hardening and Wire Wrapping ToolImpressArt Stamp EnamelImpressArt Bracelet Bending Bar Kit