100% Brand new , never used
Item's color might be different from the picture because of the aberration.
Feature:
Solid state, vibration free, noise-free.
Simple to install and operate.
Each device is fully inspected and tested.
Fitted with 2.85 inch insulated leads .
Perimeter sealer for moisture protection.
This device must be used in conjunction with a heat sink to avoid burned.
Get cooling in minutes by simply reversing the polarity, used for numerous applications such as cooling your CPU, video card, NANO Reef, laser diode, CCD camera, picnic cooler, beverage cooler , alternate power sources, or even for your own custom car drink warmer/cooler.
Since they consit primarily of semiconductor material sandwiched between ceramic plates and have no moving parts.
MODEL: TEC1-12730(TE is the abbreviation of Thermo-Electric)
Maxiumu power consumption :456 Watts
Output cooling power: 253W
Operates in 12 volts DC and >30 amps
Maximum temperature difference: △Tmax (Qc=0) Above 65°C.
Operating current: Connect with sufficient power supply at 12V 30A
Size: 62mm x 62mm x 4.8mm
Weight:62g
Note: Make sure the cooler with enough cooling, the temperature of the heat surface can not exceed 50 degrees.
Package include:
1 x TEC1-12730 Thermoelectric Peltier Cooler
- Operates in 12 volts DC and >30 amps to make it works fluently.
- Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications such as cooling your CPU, video card, NANO Reef, laser diode, CCD camera, picnic cooler, beverage cooler , alternate power sources, or even for your own custom car drink warmer/cooler.
- This device must be used in conjunction with a heat sink to avoid burned.
- Solid state, vibration free, noise-free. When the product is working, the heat dissipation surface must be heat-dissipated, connected to heat sinks, tubes, etc
- Output cooling power: 253W
- 62mm x 62mm x 4.8mm (2.44 inches square, about 3/16" thick)
- The rate of cooling/heating depends on how much power is applied.
- NOTE:1)Don't even think about hooking up 12 volts before putting one or two heat sinks in place. 2)It can get really hot and cold, really fast. Don't burn it up and/or burn yourself.
- If you just want to hold it between your fingers and experience an odd sensation, 3 volts would be enough.
- When the product is used, the cooling surface must be close to the object, and it is best to apply thermal conductive silicone grease
- Operates in 12 volts DC and >30 amps to make it works fluently.
- Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications such as cooling your CPU, video card, NANO Reef, laser diode, CCD camera, picnic cooler, beverage cooler , alternate power sources, or even for your own custom car drink warmer/cooler.
- This device must be used in conjunction with a heat sink to avoid burned.
- Solid state, vibration free, noise-free. When the product is working, the heat dissipation surface must be heat-dissipated, connected to heat sinks, tubes, etc
- Output cooling power: 253W
- 62mm x 62mm x 4.8mm (2.44 inches square, about 3/16" thick)
- The rate of cooling/heating depends on how much power is applied.
- NOTE:1)Don't even think about hooking up 12 volts before putting one or two heat sinks in place. 2)It can get really hot and cold, really fast. Don't burn it up and/or burn yourself.
- If you just want to hold it between your fingers and experience an odd sensation, 3 volts would be enough.
- When the product is used, the cooling surface must be close to the object, and it is best to apply thermal conductive silicone grease
