Product Specifications:
Thread Size: 12x1.5
Seat Type: Flat Mag Style with Washer
Hex Size: 21mm or 13/16"
Lug Nut Length: 38mm (1.5 inches)
Compatible With:
TOYOTA
1997-2019 Avalon
1992-2019 Camry
1997-2005 Celica
1997-2019 Corolla
2000-2005 Echo
2003-2014 Matrix
2000-2005 MR2 Spyder
1997-1998 Paseo
2001-2019 Prius
1997-2020 RAV4
1998-2019 Sienna
1999-2008 Solara
1997-1998 Supra
1997-1998 T100
1997-2015 Tacoma
1997-1998 Tercel
2009-2016 Venza
2007-2019 Yaris
LEXUS
2001-2006 ES330
2007-2019 ES350
2001-2006 GS300
2007-2019 GS350
2001-2007 GS430
2007-2018 GS450h
2006-2011 IS250
2001-2005 IS300
2006-2019 IS350
2001-2006 LS430
1999-2003 RX300
2004-2006 RX330
2007-2020 RX350
2006-2008 RX400h
2010-2020 RX450h
2002-2010 SC430
SCION
2005-2016 tC
2012-2015 iQ
2004-2006 xA
2004-2015 xB
2008-2014 xD
MITSUBISHI
1994-1999 3000GT
1994-2004 Diamante
1994-2012 Eclipse
2018-2020 Eclipse Cross
2004-2011 Endeavor
1995-2012 Galant
2002-2017 Lancer
1995-2020 Mirage
2017-2020 Mirage G4
2003-2020 Outlander
2018-2020 Outlander PHEV
2011-2020 Outlander Sport
*** IMPORTANT: Check before purchasing ***
- Your vehicle must have 12x1.5 threaded studs.
- Your wheels' lug holes must have Flat Mag Style Seat.
- Ensure these lug nuts are the proper size. Compare the length/width of these lug nuts (diagram can be found in the images section) to the nuts you are currently using.
- Check vehicle's wheel stud length. If your wheel studs stick out past your wheel more than 32mm (about 1.25"), these will not work for you.
- 20-piece package of mag-style aftermarket lug nuts. These steel alloy lug nuts are cold-forged and heat-treated to ensure strength, performance, and durability. Machine-precision 12x1.5 threads ensure a snug fit onto vehicle's studs. Coating undergoes salt spray testing to ensure extra protection from rust/corrosion.
- Compatible with Toyota Avalon Camry Celica Corolla Matrix, 1997-2020 RAV4, 1998-2019 Sienna, 1997-2015 Tacoma, Venza, Yaris. Compatible with Lexus ES330 ES350 GS300 GS350 GS430 GS450h IS250 IS300 IS350 LS430 RX300 RX330 RX350 RX400h RX450h SC430. Compatible with Scion 2005-2016 tC, xB, xD. Compatible with Mitsubishi 1994-2012 Eclipse, 2004-2011 Endeavor, 1995-2012 Galant, 2002-2017 Lancer, 1995-2020 Mirage, 2003-2020 Outlander. Vehicle Must Have M12x1.5 12mmx1.5 Studs.
- [Specifications] Length/Height: 1.50 inches | Thread Size & Pitch: 12x1.5 | Seat Type: Mag Style with Washer | Color: Black | Hex Size: 21mm (13/16") | STYLE: OE/Factory Mag-Style Lug Nuts. See Diagram for Measurements.
- [Safety and Installation] Wheel hardware is an important safety component. Ensure these lugnuts are the proper size before installing. Failure to install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion. Torque wrench is required for a safe installation. You'll also need a 21mm (13/16") Hex Socket Key Tool.
- These 12x1.5 lug nuts are not an oem or genuine OE part, but are compatible with various Toyota, Lexus, Scion, Mitsubishi vehicles. We are confident you'll find our lug nuts to be a comparable OEM replacement steel lug nut set, at a significant cost savings.
- 20-piece package of mag-style aftermarket lug nuts. These steel alloy lug nuts are cold-forged and heat-treated to ensure strength, performance, and durability. Machine-precision 12x1.5 threads ensure a snug fit onto vehicle's studs. Coating undergoes salt spray testing to ensure extra protection from rust/corrosion.
- Compatible with Toyota Avalon Camry Celica Corolla Matrix, 1997-2020 RAV4, 1998-2019 Sienna, 1997-2015 Tacoma, Venza, Yaris. Compatible with Lexus ES330 ES350 GS300 GS350 GS430 GS450h IS250 IS300 IS350 LS430 RX300 RX330 RX350 RX400h RX450h SC430. Compatible with Scion 2005-2016 tC, xB, xD. Compatible with Mitsubishi 1994-2012 Eclipse, 2004-2011 Endeavor, 1995-2012 Galant, 2002-2017 Lancer, 1995-2020 Mirage, 2003-2020 Outlander. Vehicle Must Have M12x1.5 12mmx1.5 Studs.
- [Specifications] Length/Height: 1.50 inches | Thread Size & Pitch: 12x1.5 | Seat Type: Mag Style with Washer | Color: Black | Hex Size: 21mm (13/16") | STYLE: OE/Factory Mag-Style Lug Nuts. See Diagram for Measurements.
- [Safety and Installation] Wheel hardware is an important safety component. Ensure these lugnuts are the proper size before installing. Failure to install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion. Torque wrench is required for a safe installation. You'll also need a 21mm (13/16") Hex Socket Key Tool.
- These 12x1.5 lug nuts are not an oem or genuine OE part, but are compatible with various Toyota, Lexus, Scion, Mitsubishi vehicles. We are confident you'll find our lug nuts to be a comparable OEM replacement steel lug nut set, at a significant cost savings.
