Indusco 93900296 Hot Dipped Galvanized Jaw & Jaw Turnbuckle, 5/8" x 12", 3,500 lbs WLL;

Indusco hot dipped drop forged galvanized jaw and jaw turnbuckles. Meets design and performance requirements of ASTM F 1145 Class G. Turnbuckles are designed for use in straight line, do not subject to bending or unusual angles. End fittings are hot galvanized after threading. Hexagon ends on all bodies provide full wrench bearings. Turnbuckles must always be inspected for wear, distortion, cracks and damage before use. If worn, distorted or damaged, discard and replace. Turnbuckles are not designed for angular loading, so the loading must be applied in a straight line. Working load limit is based on a design factor of 5:1. 21-1/2-inches average overall length with ends in closed position. 18.80-inches closed length. 5/8-inches threaded diameter by 12-inches take up.