Interlux PRIMICON Primer - Spray CAN;

Interlux Primocon Marine PrimerInterlux Primacon is an anti-corrosive primer for all underwater metal surfaces. It will provide an excellent barrier to reduce pitting caused by galvanic corrosion. For non-aluminum underwater metal use any (non-vinyl) Interlux antifouling paint. An excellent primer for antifouling paint over sanded fiberglass. Primocon can be used as a conversion coating over unknown well-adhered antifouling paint to prevent cracking of new antifouling paint. Primocon will not affect the color of antifouling paint. An excellent primer for antifouling paint over sanded fiberglass An anticorrosive primer for underwater metal surfaces (including hulls, running gear, and the lower units of outboards and I/O's) Reduces pitting of the metal from galvanic corrosionSpecifications: Coverage: Brush - 330 sq. ft/gal. | Spray - 180 ft./gal Application: Brush, Roller or Spray ***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***How To ApplyAPPLICATION DATA METHOD: Airless Spray, Brush, Conventional Spray, Roller- Pressure Pot or Siphon Cup NUMBER OF COATS: 3-4 as needed DRY FILM THICKNESS PER COAT: 1.6 mils (3 wet mils)COVERAGE: 301.2 (ft²/gal) by brush, 142.5 (ft²/gal) by spray APPLICATION TEMP: 50F Min. / 95F Max.THINNER: Special Thinner 216DRY TIMES:TempTo RecoatTo Touch95F3 HR1 HR73F5 HR2 HR50F8 HR3 HRPREVIOUSLY PAINTED SURFACES: Sand with 80 grade (grit) paper. Wipe down with Brush-Ease 433 or Special Thinner 216 to remove sanding residue.BARE METAL: Surface should be blasted to bright metal. For steel surfaces, grit blasting is preferred. For aluminum or other light alloys, sandblast if possible or grind with medium coarse grade (grit) emery cloth. Remove all blasting/grinding/sanding residues with a clean air line and sweep with a clean brush or broom. (Vacuum clean for best results.) Do not wipe with cloth rages after blasting or sanding as fibers may be pulled out and protrude through the primer coats.APPLICA