Brush Door Sweeps are designed to seal the gap between the bottom of the door and the top of the threshold or floor surface. They are usually supplied with a flat flange. The flat flange provides the best contact between the brush and the threshold or floor surface
- All clear anodized brush products are supplied with gray brush (available with black brush upon request). Other finishes supplied with black brush.
- All brush seals greatly reduce the infiltration of light, air, wind, rain, and snow; prevent heat loss; control the penetration of smoke and fumes.
- Brush remains flexible down to -40°F and has a melting point above 400°F.
- UV stabilized, dependable, long-lasting, cost-effective.
- Nylon brush insert is designated by a undefinedNBundefined following the finish code.
- All clear anodized brush products are supplied with gray brush (available with black brush upon request). Other finishes supplied with black brush.
- All brush seals greatly reduce the infiltration of light, air, wind, rain, and snow; prevent heat loss; control the penetration of smoke and fumes.
- Brush remains flexible down to -40°F and has a melting point above 400°F.
- UV stabilized, dependable, long-lasting, cost-effective.
- Nylon brush insert is designated by a undefinedNBundefined following the finish code.
