Shurtape HW-300 Housewrap Sheathing Tape is a water-based acrylic housewrap tape designed as a closure system and/or operates as a vapor seal on interior and exterior vapor barrier materials. The tape can be used for repair ...

Buy Now From Amazon

Shurtape HW-300 Housewrap Sheathing Tape is a water-based acrylic housewrap tape designed as a closure system and/or operates as a vapor seal on interior and exterior vapor barrier materials. The tape can be used for repair of any housewrap materials in addition to its usefulness for new construction. Shurtape HW 300 may be applied in vast temperature ranges and humid conditions. It seals seams and joints on all types of housewrap, sheathing, insulation or vapor barrier materials. It is UV resistant and is coated with an aggressive permanent adhesive with high shear and holding power capabilities. House wrap tape is applied over the seams of installed housewrap to contribute towards a secondary line of defense against exterior moisture infiltration of the wall envelope. It helps to maximize energy efficiency by sealing the gaps, cracks and crevices where air can easily enter the home and ultimately affect your heating and cooling costs.Technical InformationCore: 3 inch diameterBacking/Carrier: filmAdhesive: water-based (emulsion) acrylicThickness: 3 mils (carrier, adhesive)Adhesion: 51 ounces per inch (to stainless steel test panel) Tensile Strength: 34 pounds per inch (longitudinal) Application Temperature: 14F to 176FElongation: 162 %Adhesion to Housewrap: 26 ounces per inchFlame Spread Index: 0Smoke Development Index: 0. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

  • Adhesive: water-based (emulsion) acrylic
  • Carrier/backing: film
  • Thickness: 3 mils (carrier, adhesive)
  • Application temperature: 14F to 176F
  • Certifications: CCMC Report No: 13401-R; US Green Building Council ? LEED Point contributor product; Tested in accordance with UL 723
  • Adhesive: water-based (emulsion) acrylic
  • Carrier/backing: film
  • Thickness: 3 mils (carrier, adhesive)
  • Application temperature: 14F to 176F
  • Certifications: CCMC Report No: 13401-R; US Green Building Council ? LEED Point contributor product; Tested in accordance with UL 723

Similar Products

EcoPoxy - Liquid Plastic (1, 6 Liter - 2:1 Mix)Variety Pack 1 (10 Colors) Mica Powder Pure, 2TONE Series Variety Pigment Packs (Epoxy,Paint,Color,Art) Black Diamond PigmentsAllway Tool Series Allway 10031 HM1 1 Gallon Helix Paint Mixer, Silver20 8oz Disposable Graduated Clear Plastic Cups for Mixing Paint, Stain, Epoxy, ResinCRC 03300 Silicone Mold Release Spray, (Net Fill Weight 12 oz) 16oz Aerosol can.Crystal Clear Bar Table Top Epoxy Resin Coating for Wood Tabletop - 1 Gallon KitCrystal Clear Bar Table Top Epoxy Resin Coating for Wood Tabletop - 2 Gallon KitCrystal Clear Epoxy Resin One Gallon Kit | MAS Table Top Pro Epoxy Resin & Hardener | Two Part Kit for Wood Tabletop, Bar Top, Resin Art | Set Includes Spreader & Brush | Professional Grade Coating