This is the E-Flite V2 30-amp pro switch-mode brushless ESC.
Features:
- Up to 30 amps continuous current with proper air flow and 35amps burst current (15 seconds)
- 3.5A continuous current, 5V Switch-Mode BEC Circuit
- Stronger BEC for support of most 3-axis stabilizationsystems
- Drive up to 7 analog or 6 digital standard-size servos withthe BEC
- 3- to 4-cell Li-Po, 9- to 12-cell Ni-MH/Ni-Cd input voltage
- Programmable motor braking
- Safe power-arm mode prevents accidental starts
- Programmable low voltage cutoff with settings for 3-cellLi-Po (9.2V), 4-cell Li-Po (12V) or 74% of battery starting voltage
- Programmable throttle input range (1.1ms-1.9ms or1.2ms-1.8ms)
- Programmable soft start for helis and airplanes
- Auto motor shut down if signal is lost or there is interference
- Programmable timing-5 user-selectable ranges for use with alarge variety of brushless motors
- Pre-wired connectors-E-Flite EC3TM connector on battery inputand 3.5mm gold bullet connectors on motor output leads
