This Banjo HB038-90 barbed hose 90-degree elbow is made of glass-reinforced polypropylene and has a 3/8" barbed connection on one end and a 3/8" male NPT threaded connection on the other to connect a tu...

Buy Now From Amazon

This Banjo HB038-90 barbed hose 90-degree elbow is made of glass-reinforced polypropylene and has a 3/8" barbed connection on one end and a 3/8" male NPT threaded connection on the other to connect a tube or a hose to a female NPT threaded connection at a 90-degree angle to change the direction of flow. This schedule 80 elbow is made of glass-reinforced polypropylene for rigidity, lightweight, dimensional stability, and resistance to high impact, heat, corrosion, and most chemicals. The barbed connection creates a tight seal on a tube or hose, and the male National Pipe Taper (NPT) threaded end connects with a female NPT threaded connection. The integral 3/4" hex nut provides a gripping surface for a wrench when tightening the fitting. The maximum working pressure for this fitting is 150 pounds per square inch (psi) at 70 degrees F. This barbed hose elbow is suitable for use in agricultural and industrial systems for liquid flow applications.

Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.

Banjo manufactures valves, couplings, pumps, pipe and hose fittings, and other fluid handling products for industrial applications. The company, founded in 1995, is headquartered in Crawfordsville, IN.



  • 90-degree elbow for connecting tubing to a threaded connection at an angle
  • Connects a hose on one end and a female NPT threaded connection on the other
  • Glass-reinforced polypropylene for rigidity, lightweight, dimensional stability, and resistance to heat, corrosion, most chemicals, and high impact
  • Integral hex nut for using a wrench to tighten the fitting
  • Maximum working pressure of 150 psi at 70 degrees F
  • 90-degree elbow for connecting tubing to a threaded connection at an angle
  • Connects a hose on one end and a female NPT threaded connection on the other
  • Glass-reinforced polypropylene for rigidity, lightweight, dimensional stability, and resistance to heat, corrosion, most chemicals, and high impact
  • Integral hex nut for using a wrench to tighten the fitting
  • Maximum working pressure of 150 psi at 70 degrees F

Similar Products

Banjo HB038 Polypropylene Hose Fitting, Adapter, 3/8bayite BYT-7A015 DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPMPentek 158110 3/8Hydronix SDC-25-0501 NSF Sediment Filter 2.5Watts SVIG10 Pre-Cut 1/2-Inch Diameter by 3/8-Inch Clear Vinyl Tubing, 10-Foot LengthEverflo EF2200 Diaphragm / Demand WATER TRANSFER PUMP 2.2 GPM 12V Volt 70 psiWire Harness with ClampsLDR 516 B3810 Clear Braided Nylon Tubing, 3/8-Inch ID