System Requirements: Windows XP/Vista/Win 7 8 or up, Linux 2.6.4 or up, Android 2.1 or up, and Mac OS 10.6 or up
Also compatible Android TV Sticks MK802, MK808, UG802, UG007, iMito, Favi
Using this adapter to connect a compatible device directly to an Ethernet cable can result in speeds two or three times faster than WIFI.
Feature
Realtek RTL8152 Chipset
Convert USB 2.0 micro-b to RJ45 Ethernet port
cable length: 3.9 inches / 10 centimeters
Working temperature: 0„ƒ - 70„ƒ
Support all USB standard commands
Support TCP/IP, NetBEUI, ipx/spx transfer protocol
Half/Full duplex 10/100Mbps operation
Support Wake-on-Lan (WoL) and RealWoW
Switch 10/100Mbps network automatically
Support IEEE 802.3/802.3U/802.3x/802.1/802.1Q/802.3az-2010 protocol
Compliant to USB1.0/1.1/2.0/3.0
Extremely low power consumption
Independent MAC network address
TESTED:
Works with NetBooks, Notebooks, UltraBooks, MacBook Air Lion and Mountain Lion 10.6 or above.
Works with Nexus 7 1st gen, up to Android 4.4.4. and Nexus 7 2nd gen, with Android 5.0.1 or later.
Works with Android "Stick Computers" such as MK802, MK808 and UG802. Some Sticks may need a powered USB hub
EXCEPTIONS: This adapter will not work if tablet manufacturers have not included an Ethernet (wired internet) capability in their version of the Operating System. For this reason, the following ANDROID tablets can not use this adapter: Samsung tablets, ACER, Lenovo, Sony, Coby-Kyros. Toshiba models "Thrive7", AT200" (ExciteLE) will not work with this adapter. This adapter will not Enable a tablet that is not configured to work with Ethernet. Consult your Manufacturer or your applicable web forum if you are uncertain.
- 10-inch Host OTG Micro USB cable to RJ45 LAN for a wired internet connection ( Realtek RTL8152 based )
- Driverless design for Windows 8.1 / 10 (32/64 bit) or up, Mac OS 10.9 or up, and Android 4.0 or up operating systems
- Add 10/100M network ability to compatible devices - older Android Tablets, Windows Tablet computers, and more, and enable it to share hard disk files, printers, and peripherals
- Plug it in, change the settings in the computer, restart, and use it ( Or repeat plug-and-unplug 3 times to help your device identify )
- Limited Android compatibility. Android users, before you buy be sure to look if the device has a (grayed out) "Ethernet" menu in Settings under WIRELESS & NETWORKS. Most probably it will just work then
- Compatible with Samsung Nexus 7 Galaxy S2 / S3 / S4 & Galaxy Nexus, Samsung i9100 i9300 i9220 i9250 / Nvidia Shield tablet K1 / Samsung 900 series
- Compatible with Google Nexus Player / Nexus 4 5 7 10 / Nexus One and Nexus S, Dell Venue Pro 8 tablets, Raspberry Pi Zero, HP Stream 7, Asus T100taf
- 10-inch Host OTG Micro USB cable to RJ45 LAN for a wired internet connection ( Realtek RTL8152 based )
- Driverless design for Windows 8.1 / 10 (32/64 bit) or up, Mac OS 10.9 or up, and Android 4.0 or up operating systems
- Add 10/100M network ability to compatible devices - older Android Tablets, Windows Tablet computers, and more, and enable it to share hard disk files, printers, and peripherals
- Plug it in, change the settings in the computer, restart, and use it ( Or repeat plug-and-unplug 3 times to help your device identify )
- Limited Android compatibility. Android users, before you buy be sure to look if the device has a (grayed out) "Ethernet" menu in Settings under WIRELESS & NETWORKS. Most probably it will just work then
- Compatible with Samsung Nexus 7 Galaxy S2 / S3 / S4 & Galaxy Nexus, Samsung i9100 i9300 i9220 i9250 / Nvidia Shield tablet K1 / Samsung 900 series
- Compatible with Google Nexus Player / Nexus 4 5 7 10 / Nexus One and Nexus S, Dell Venue Pro 8 tablets, Raspberry Pi Zero, HP Stream 7, Asus T100taf