The Dwyer Series 476A single-pressure digital manometer is used to perform single-pressure measurements and to set supply pressures, verify pressure switch operation, adjust regulators, check pneumatic ...

Buy Now From Amazon

The Dwyer Series 476A single-pressure digital manometer is used to perform single-pressure measurements and to set supply pressures, verify pressure switch operation, adjust regulators, check pneumatic systems, and computer peripherals. The meter is suitable for use with air and compatible gases, and has an accuracy of + or - 1.5% of full scale. The extruded aluminum case provides durability. The four-digit LCD displays the pressure measurement, and a zero function nulls minor pressure differences before measuring.

Specifications
Pressure typesSingle
Media typeAir and compatible gases
Case materialExtruded aluminum
Pressure unitsinH2O, mmH2O, bar, mbar, psi, inHg, mmHg, kPa
Connection type3/16" or 1/4" inside diameter (ID) tubing
Maximum pressure5 gauge psi
DisplayFour-digit LCD
Resolution0.02 (inH2O)
Temperature limits0 to 140 degrees F/-17.8 to +60 degrees C
Compensated temperature limits32 to 104 degrees F/0 to 40 degrees C
Dimensions6-17/32 x 2-13/16 x 29/32 (H x W x D)
Power9V alkaline battery (included)

H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Manometers measure the pressure of a liquid or gas. They are used in laboratory, medical equipment, engineering, automotive, and heating, ventilation, and air-conditioning applications. Manometers measure any combination of gauge, absolute, or differential pressures. Gauge pressure is the amount of pressure in a system relative to the ambient pressure, absolute pressure is the amount of pressure in a system relative to an absolute vacuum, and differential pressure is the difference between two pressures. Analog manometers are composed of columns of liquid, and they use gravity and the liquid's density to calculate pressure. Because they have no moving parts, analog manometers do not require re-calibration. Digital manometers have pressure sensors that are connected to a system with a hose to provide a digital readout of the amount of pressure present in a system. They use microprocessors to calculate pressure, and they require periodic calibration to help ensure accuracy.

Dwyer Instruments manufactures measurement and control instruments, including pressure gauges, flow meters, level instrumentation, temperature instrumentation, and air quality monitors. The company, founded in 1931, is headquartered in Michigan City, IN.



  • Low Cost, High Reliablity
  • Simple Operation, Easy to Use
  • Power Requirements: 9 V alkaline battery, installed, non-functional, user replaceable.
  • Process Connections: Barbed connection for use with 3/16" or 1/4" I.D. tubing.
  • MANUFACTURER DIRECT
  • Low Cost, High Reliablity
  • Simple Operation, Easy to Use
  • Power Requirements: 9 V alkaline battery, installed, non-functional, user replaceable.
  • Process Connections: Barbed connection for use with 3/16" or 1/4" I.D. tubing.
  • MANUFACTURER DIRECT

Similar Products

Yellow Jacket 78071 Manometer Hose with FittingYellow Jacket Gas Pressure Test Kit, 0 to 35 in WCDwyer A-47X-BOOT, Protective Magnetic Rubber Boot for manometersFieldpiece Dual-Port Manometer - SDMN5Fluke 62 Max Thermometer, Non Contact, -22 to +932 Degree F RangeRedline Detection 95-0082 Easy Intake Diagnostic Leak DetectorAnderson Metals 57001-0402 Brass Hose Fitting, Adapter, 1/4