Pump housing - ABS
Switch housing - ABS
Tank - ABS
Tank cover - Galvanized steel
Motor shaft - Stainless steel
Impeller - Polypropylene
Discharge adapter - Acetal
The VCL-24ULS has a 1 Gal. tank capacity. Little Giant VCL Series is ideal for collecting, detecting and the automatic removal of condensate from air conditioning equipment, de-humidifiers, high efficiency furnaces, condensing boilers and other equipment where an automatic drain pump is required. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.
It is designed for automatic collection and removal of condensate from air conditioning, refrigeration and dehumidification equipment when gravity drainage is not possible or practical. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.
- LARGE TANK CONDENSATE PUMP: Little Giant condensate removal pump features safety switch, 1-gallon ABS plastic tank and 6-ft. power cord
- PUMP WITH SAFETY SWITCH: prevents flooding if pump fails; can be connected to furnace, air conditioner or dehumidifier to shut down equipment or wired to an audible alarm (not included)
- CONSTRUCTION: ABS pump housing, switch housing and tank; galvanized steel tank cover; stainless steel motor shaft; polypropylene impeller; acetal discharge adapter
- HIGH PERFORMANCE MOTOR: 115 Volt, 1/18 HP, thermally protected, fan-cooled concentric motor with stainless steel motor shaft, 60 Hz, 2.5 Amps, 148 Watts
- SPECIFICATIONS: 1/4-inch FNPT x 3/8-inch O.D. barbed discharge suitable for 3/8-inch I.D. vinyl tubing; 270 GPH at 1-ft. lift, 10.4 PSI, 6-ft. cord with 115-Volt plug; 120 degrees F max temperature
- LARGE TANK CONDENSATE PUMP: Little Giant condensate removal pump features safety switch, 1-gallon ABS plastic tank and 6-ft. power cord
- PUMP WITH SAFETY SWITCH: prevents flooding if pump fails; can be connected to furnace, air conditioner or dehumidifier to shut down equipment or wired to an audible alarm (not included)
- CONSTRUCTION: ABS pump housing, switch housing and tank; galvanized steel tank cover; stainless steel motor shaft; polypropylene impeller; acetal discharge adapter
- HIGH PERFORMANCE MOTOR: 115 Volt, 1/18 HP, thermally protected, fan-cooled concentric motor with stainless steel motor shaft, 60 Hz, 2.5 Amps, 148 Watts
- SPECIFICATIONS: 1/4-inch FNPT x 3/8-inch O.D. barbed discharge suitable for 3/8-inch I.D. vinyl tubing; 270 GPH at 1-ft. lift, 10.4 PSI, 6-ft. cord with 115-Volt plug; 120 degrees F max temperature