Valley Enterprises 8-Pin Mobile Radio Programming Cable USB FTDI Compatible with Kenwood KPG-46;

Aftermarket Programming Cable

FTDI USB Chipset

TX and RX Led indicators

Total Length: 1M (3.3 feet)

No programming software included

Equivalent to OEM Part # KPG-46

For use with Kenwood Mobile Radios (by RJ-45 8-pin): KDS-100, NX-700E, NX-700HK, NX-700K, NXB-710, NX-800E, NX-800HK, NX-800HK2, NX-800K, NX-800K2, NXB-810, NXR-800K3, NXR-7100, NXR-810, TK-760, TK-760G, TK-762, TK-762G, TK-763, TK-763G, TK-768, TK-768G, TK-780, TK-780G, TK-785, TK-868, TK-868G, TK-880, TK-880G, TK-885, TK-980, TK-981, TK-6110, TK-7100, TK-7100H, TK-7102H, TK-7150, TK-7160, TK-7160E, TK-7160HM, TK-7160M, TK-7162E, TK-7180, TK-7180E, TK-7180E, MPT TK-7189, TK-7189E, TK-7189E, TK-7302E, TK-7302HM, TK-7302M, TK-8100, TK-8100H, TK-8102H, TK-8150, TK-8160, TK-8160E, TK-8160HM, TK-8160M, TK-8162E, TK-8180, TK-8180E, TK-8180E, TK-8189, TK-8189E, TK-8189E, TK-8302, TK-8302E TK-8302HK2, TK-8302M,2 TK-90, TKB-751, TKB-851, TKR-720, TKR-73,0 TKR-740, TKR-750, TKR-750E (Version 2), TKR-751E, TKR-820, TKR-830, TKR-850, TKR-850E (Version 2), TKR-851E, TKR-7500,TKR-8400, TM-261A, TM-271A, TM-271E, TM-461A, and TM-471A.

This device requires an FTDI USB VCP Driver. Virtual COM port (VCP) drivers cause the USB device to appear as an additional COM port available to the PC. Application software can access the USB device in the same way as it would access a standard COM port.

For free driver download and installation instructions. Please visit the FTDI website: http://www.ftdichip.com/Drivers/VCP.htm