The RO Pure Reverse Osmosis System consists of four separate stages. Stage #1 - Five Micron Sediment Pre-Filter that traps particulate matter like dirt, rust, and silt that will affect the taste and appearance of your water....

Buy Now From Amazon

The RO Pure Reverse Osmosis System consists of four separate stages. Stage #1 - Five Micron Sediment Pre-Filter that traps particulate matter like dirt, rust, and silt that will affect the taste and appearance of your water. Stage #2 - Five Micron Carbon Block Pre-Filter that helps ensure a greater reduction of chlorine and other materials that cause bad taste and odors. (The first two stages are called Pre-Filters because they filter in front of the Reverse Osmosis Membrane). Stage #3 - The 50 GPD Membrane is the heart of the Reverse Osmosis System. This semi-permeable membrane will effectively reduce TDS (total dissolved solids), Sodium and a wide range of contaminants such as Lead, Percolate, Chromium, Copper and Radium. It will also remove over 99.95% cysts such as Giardia and Cryptosporidium. Stage #4 - Five Micron Carbon Post-Filter (105341) which is used as a final polishing filter. It is important that this system is properly installed and maintained with an incoming water pressure of 40 to 80 psi for it to operate as designed. The filtered water passes through the membrane and enters the storage tank. When you're ready for a taste, it will leave the storage tank and pass through the fourth stage on its way up to the faucet. The end result? Crystal clear, high quality, and great tasting water! In the Box: RO Pure Reverse Osmosis module (pre-installed filters), Parts Bag, 3 Gallon Storage tank, Faucet, and installation instructions (manual).

  • Four stage filtration: sediment pre-filter (WP105351) reduces dirt, silt; carbon pre-filter(WP105351) reduces chlorine taste and odors; the 50 GPD membrane (WP105331) reduces TDS, chromium, arsenic, copper, and lead; the carbon post-filter(WP105381) reduces chemicals like MTBE's, atrazine, benzene, and lindane
  • The system includes a RO Pure Reverse Osmosis module with four pre-installed filters; a parts bag; a chrome, monitored, top-mount, air-gap faucet, and 3 gallon storage tank giving you crystal clear, high-quality, and great-tasting drinking water
  • This space-saving, compact design allows this system to fit comfortably under your sink, requires fewer tube connections, includes back-flow prevention valves installed between the elements and cartridges have double O-rings so they won't leak
  • The easy, quick-change push release filter system allows for easy filter change with no need to shut off the water source, is installed with check valves in the filter lid between cartridges to prevent back-flow and shut off valves in each filter head that shuts off the water flow when cartridges are removed
  • Maximum operating pressure is 80 psi and to maintain top performance replace sediment and carbon pre-filters every 6 months, post carbon filter every 12 months, and the membrane every 2 to 5 years
  • Four stage filtration: sediment pre-filter (WP105351) reduces dirt, silt; carbon pre-filter(WP105351) reduces chlorine taste and odors; the 50 GPD membrane (WP105331) reduces TDS, chromium, arsenic, copper, and lead; the carbon post-filter(WP105381) reduces chemicals like MTBE's, atrazine, benzene, and lindane
  • The system includes a RO Pure Reverse Osmosis module with four pre-installed filters; a parts bag; a chrome, monitored, top-mount, air-gap faucet, and 3 gallon storage tank giving you crystal clear, high-quality, and great-tasting drinking water
  • This space-saving, compact design allows this system to fit comfortably under your sink, requires fewer tube connections, includes back-flow prevention valves installed between the elements and cartridges have double O-rings so they won't leak
  • The easy, quick-change push release filter system allows for easy filter change with no need to shut off the water source, is installed with check valves in the filter lid between cartridges to prevent back-flow and shut off valves in each filter head that shuts off the water flow when cartridges are removed
  • Maximum operating pressure is 80 psi and to maintain top performance replace sediment and carbon pre-filters every 6 months, post carbon filter every 12 months, and the membrane every 2 to 5 years

Similar Products

Watts Premier Ro Pure Replacement Filter 6-pack Plus MembraneWatts Premier WP531152 RO Pure 4 Pack Replacement FiltersWatts Premier RO Pure & Pure Plus 50 GPD MembraneWatts Premier 531417 RO Pure Plus (VOC) Reverse Osmosis w/Brushed Nickel, Top-Mount Twist FaucetWatts Premier WP105341 RO Pure Carbon Post-Filter, 12Watts Premier 531109 Annual Replacement Filter KitWatts Premier Annual 3 Pack Yearly Replacement Filter Set 1R-1Y-1BWatts Premier 531160 RO Pure Plus 4 Pack Filter Kit