Dryerbox Model 425 DB-425 | New Construction 2x6 Walls - Venting up;

Why The Need For The Dryer Box? In the past, homeowners had to put up with the inefficient venting of their dryer appliance exhaust due to numerous friction causing bends or kinks in the flex duct hose that connects the dryer to the wall exhaust pipe. Lint build up and a fire hazard are the unwelcome bi products of these annoying bends. In order to accommodate these flow restrictive bends, the dryer appliance had to be located five to six inches away from the wall, taking away from valuable living area. The Dryer Box solves these issues and provides much more in benefits to the builder, the contractor and the homeowner. What Are The Benefits Of The Dryer Box? Locate the dryer right up against the wall Flex is protected from getting squished No trim ring piece is needed Lint build up is minimized Efficiency is increased Dryer related service calls are almost eliminated Elbow eliminator gain 5 foot of duct run Doubles as gas connection receptacle Can be installed in One Hour wall Meets code requirements as a clean out Laundry room appears larger to prospects Surface is paintable, no masking needed Applauded by building inspectors Reduces the fire hazard Socks and clothing can t fall behind appliance Prevents costly punch out work to damaged 90 Eliminates mold potential Contributes 2 USGBC LEED credits Which Are The Specifications For The Dryer Box Model 425? Designed for upward exhaust direction 22 gauge aluminized steel weighing 4.14 pounds each Top port measures 4 1/8 with very slight oval shape Distance from nailing flange to rear of box is 4 1/4 Overall measurements: 21 h x 12 1/2 w x 5 1/8 deep Inside measures 9 1/2 wide x 18 1/4 tall.