This Advanced Digital to Analog Audio Decoder uses 24bit audio DSP, 96KHz digital receivers, 192KHz/24bit ADC & DAC chips. Decode and convert SPDIF or Coaxial input Dolby Digital (AC-3), Dolby Pro Logic, PCM (up to 5.1CH) to 2.0CH L/R analog audio and 3.5mm stereo headphone outputs. An ideal audio converter for your cable/satellite/DVD/Blu-ray boxes with Dolby Digital 5.1CH (AC-3) audio outputs.Â
- Decodes DTS/Dolby Digital source digital audio to analog 2.0CH stereo audio output (RCA L/R and 3.5mm Headphone), Supports Digital Audio Input: SPDIF (Optical), Coaxial - Make sure switch to the correct input on the side
- Supports simultaneous RCA L/R and 3.5mm Headphone outputs
- Make sure the the plastic removed. And the Optical Cable is pushed in completely.
- TROUBLESHOOT: Signal from the TV goes into SPDIF (Optical), or Coxial input of the DA34 and The output of RCA or Headphones will go into your analog speakers or headphones. Make sure the power adapter is connect properly. And all the cables are inserted all the way in. If there is still no sound, please change the TV Audio out to PCM Only from the TV Menu.
- Decodes DTS/Dolby Digital source digital audio to analog 2.0CH stereo audio output (RCA L/R and 3.5mm Headphone), Supports Digital Audio Input: SPDIF (Optical), Coaxial - Make sure switch to the correct input on the side
- Supports simultaneous RCA L/R and 3.5mm Headphone outputs
- Make sure the the plastic removed. And the Optical Cable is pushed in completely.
- TROUBLESHOOT: Signal from the TV goes into SPDIF (Optical), or Coxial input of the DA34 and The output of RCA or Headphones will go into your analog speakers or headphones. Make sure the power adapter is connect properly. And all the cables are inserted all the way in. If there is still no sound, please change the TV Audio out to PCM Only from the TV Menu.
