Chemical Guys Acc_G08 Wheel & Tire Brush, Short Handle

The Grit Guard Insert Blue (Two Pack) - Fits 12 inch Diameter Bucket Grit Guard is 2 1/2 inches tall. Diameter is 10 3/8 inches. A Grit Guard insert fits a 12 inch diameter bucket. The Grit Guard Insert - Blue. Keep particles, grime, and particulates off your sponge or mitt while washing with the Grit Guard Insert. Designed with a raised radial surface that fits in the bottom of most 3-5 gallon buckets. Works to extract grit from your wash mitt or sponge when dragged across the Grit Guard surface. The dirt then settles on the bottom of the bucket, away from your wash mitt or sponge, keeping your water clean. The four quadrants at the base of the Grit Guard calm the wash water and hold the grid above the bottom of the bucket, so dirt falls to the bottom and stays there. You'll be amazed at how much dirt accumulates in the bottom of your wash bucket! WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

2-Pack Bucket Strainer - Grit Guard Inserts fit snugly in the bottom of your detailing bucket, effectively separating grit from your wash mitt! Designed to fit most 10 inch diameter buckets including a 3.5 gallon, 4 gallon, 5 gallon and 6 gallon bucket.
Car Cleaning Supplies - With a radial surface design, the insert helps remove small particles like dirt, grit, and grime from washing mitts, ensuring a spotless, scratch free mitt that leaves your vehicle gleaming with each wash.
Protective Shield - By allowing all debris to settle at the bottom of the bucket, our system ensures that your wash cloth remains free from contaminants and your paint stays pristine, thus safeguarding automotive surfaces from scratches and swirl marks.
Easy To Use - Simply place in the bottom of your cleaning bucket and fill with cleaning solution. When you rub your mitt against the insert in the water, the dirt and particles sink to the bottom, leaving your mitt free and clear.
Ultimate Accessory - At 2.5 inches tall, the Grit Guard Insert creates ample space for cleaning. Compatible with a wide range of cleaning tools including wash mitts for car washing, microfiber, sponges, pads, brushes and tile grouting accessories.
2-Pack Bucket Strainer - Grit Guard Inserts fit snugly in the bottom of your detailing bucket, effectively separating grit from your wash mitt! Designed to fit most 10 inch diameter buckets including a 3.5 gallon, 4 gallon, 5 gallon and 6 gallon bucket.
Car Cleaning Supplies - With a radial surface design, the insert helps remove small particles like dirt, grit, and grime from washing mitts, ensuring a spotless, scratch free mitt that leaves your vehicle gleaming with each wash.
Protective Shield - By allowing all debris to settle at the bottom of the bucket, our system ensures that your wash cloth remains free from contaminants and your paint stays pristine, thus safeguarding automotive surfaces from scratches and swirl marks.
Easy To Use - Simply place in the bottom of your cleaning bucket and fill with cleaning solution. When you rub your mitt against the insert in the water, the dirt and particles sink to the bottom, leaving your mitt free and clear.
Ultimate Accessory - At 2.5 inches tall, the Grit Guard Insert creates ample space for cleaning. Compatible with a wide range of cleaning tools including wash mitts for car washing, microfiber, sponges, pads, brushes and tile grouting accessories.

Top WaffleMaker Reviews

The Original Grit Guard Blue Bucket Insert (2 Pack) | 10" Diameter Car Wash Bucket Guard for Car Washing & Detailing | Compatible with 3.5, 4, 5 and 6 Gallon Buckets;