Printhead Hospital Printer Cleaning Kit for Brother MFC DCP Printers - 5 oz | Easy to use kit to Clear Printer nozzles;

Cleans blocked Brother inkjet printers quickly and easily.

SAFETY NOTES:
Keep out of the reach of children
Eye protection is recommended during use

Compatibility notes
✔︎ Compatible with all Brother MFC and DCP printers
✔︎ Printer must be clear of all error messages before use, including "clean printer head"
✔︎ We recommend using fresh ink from a different supplier after cleaning: if your ink caused the blockage it can reclog the head during priming

Each Kit contains
☛ 5 oz Printhead Cleaning Fluid
☛ Syringe
☛ Connector tubing
☛ 1 Pair Reusable Nitrile Powder-free Gloves
☛ Blotting Paper
☛ Laminated Instruction Card

Instructions for use
1. Print a nozzle check pattern to identify which colors need cleaning
2. Warm up the cleaning fluid
3. Remove ink cartridges
4. Place blotting paper under printhead
5. Inject 3ml fluid into each nozzle to be cleaned
6. Leave for 1 hour
7. Inject a further 1ml
8. Remove blotting paper
9. Install fresh cartridges and run 2 printer cleaning cycles
The kit works in 90% of cases and comes with troubleshooting notes.

Disclaimer
Printer cleaning is successful 90% of the time, but does require a supply of fresh ink and carries a small risk of damage to the printer. As such, we recommend using cleaning when other methods (such as the inbuilt cleaning function) have already been tried, and when the printer has no functional use unless fixed.
If the kit does not clean your printer, please contact us for advice; we will send a $15.00 refund if unsuccesful