Save yourself 50 cranks both up and down with the FLIP. It is completely automatic, extends your trailer jack, and has two times more contact surface area than other jack feet, providing more stability for your...

Buy Now From Amazon

Save yourself 50 cranks both up and down with the FLIP. It is completely automatic, extends your trailer jack, and has two times more contact surface area than other jack feet, providing more stability for your trailer, with no springs, cables, pins, or clips required. It is the only jack foot that is completely automatic and eliminates the need to search for rocks or wood blocks to put under your trailer jack.

It's time to stop fumbling with a stack of wood blocks to stick under your tongue jack. Get a Fastway Flip jack foot today and say goodbye to your tongue jack hassles.

With the trailer hitched as you usually tow: - If there is 8" to 10" from the bottom of the outside jack tube to the ground use a 4" tall Flip jack foot. - If there is more than 10" from the bottom of the outside jack tube to the ground use a 6" tall Flip jack foot. General Rule Average height person with trailer coupled to tow vehicle: - If the top of your trailer frame sits above the bottom of your knee cap you probably need a 6" tall Flip jack foot. - If it sits below the bottom of your knee you probably need a 4" tall Flip jack foot. The 4" Flip works best on trailers with low decks like horse trailers, flatbed trailers, some older model RV Travel trailers and small single axle trailers. The 6" Flip works best on trailers with taller decks like over the axle flatbed trailers, enclosed cargo trailers, ATV/snowmobile V-nose trailers and newer RV travel trailers.

The Flip jack foot come in two widths. One to fit a 2-1/4" jack, and one to fit a 2" jack. To find out what size jack you have measure the width of your jack above the trailer frame (as shown in the illustration to the right.) - A 2-1/4" Flip fits almost all standard tongue jacks (95+%). - A 2" Flip fits very small trailers and some electric tongue jacks.

  • Foot flips up as jack is retracted, making storage simple and convenient
  • Eliminates the need for blocks of wood
  • 6" Extension minimizes amount of cranking required to position jack
  • 1,400 lbs. max tongue weight
  • Extremely fast and easy installation
  • Foot flips up as jack is retracted, making storage simple and convenient
  • Eliminates the need for blocks of wood
  • 6" Extension minimizes amount of cranking required to position jack
  • 1,400 lbs. max tongue weight
  • Extremely fast and easy installation

Similar Products

Fastway Zip 4 Foot Breakway Cable 80-01-2140Fastway 82-00-3315 7 Way Plug CoverCamco RV Curved Leveler with Chock - 2 Pack - Easy Drive-on Leveler Adds Up to 4Tri-Lynx 00015 Lynx Levelers - 10 PackPair of Telescoping Trailer Stabilizer Jacks(1000lb capacity each) by Pacific RimCamco 90 Degree Hose Elbow- Eliminates Stress and Strain On RV Water Intake Hose Fittings, Solid Brass (22505)Camco RV Brass Inline Water Pressure Regulator- Helps Protect RV Plumbing and Hoses from High-Pressure City Water, Lead Free (40055)Camco RV Leveling Scissor Jack Socket Drill Adapter, Fits 3/8