TRANSFERRING IMAGE CLIP LASER LIGHT TRANSFER PAPER
Use Commercial Heat Press
1) Marry the imaged sheet with the transfer sheet. This will apply the transfer coating to the imaged area. Press: 10 seconds at 210° F using light/medium pressure
.
Separate the papers while still hot.
2. Place the imaging sheet face down onto the fabric. Press: 15 seconds at 400° F using heavy pressure.
Peel off the backing paper while it is still hot. For the best feel, stretch the fabric after pressing while it is still hot.
- INSTRUCTIONS IMAGE CLIP LASER LIGHT TRANSFER PAPER: PRINTING 1) Mirror the Image. 2) Laser print the coated side of the paper identified as the Imaging Sheet
- 3) IMAGE CLIP® Laser Light Paper should be fed into the copier or printer with the short dimension first (grain long). For best fusing results use a heavy paper setting.
- WASHING INSTRUCTIONS Turn garment inside out and wash in cold water using a mild detergent. Do not use bleach. Dry on low heat setting. Do not iron directly on the transferred area.
- INSTRUCTIONS IMAGE CLIP LASER LIGHT TRANSFER PAPER: PRINTING 1) Mirror the Image. 2) Laser print the coated side of the paper identified as the Imaging Sheet
- 3) IMAGE CLIP® Laser Light Paper should be fed into the copier or printer with the short dimension first (grain long). For best fusing results use a heavy paper setting.
- WASHING INSTRUCTIONS Turn garment inside out and wash in cold water using a mild detergent. Do not use bleach. Dry on low heat setting. Do not iron directly on the transferred area.
