The Evolution RAGE230BLADE is a 9-Inch Tungsten Carbide Tipped multipurpose cutting blade. It's capable of cutting through steel, aluminum, wood with nails in, and plastics. Meant for use with the Evolution RAGE 230. 1-Inch arbor, .078-Inch kerf, 26 teeth, Max RPM 3000
- MULTI-MATERIAL: Easily cuts mild steel, aluminium, plastic, laminates, decking, wood and even reclaimed wood with embedded nails
- SIZE: 230mm (9") Diameter and 25.4mm (1") Bore
- HIGH GRADE CARBIDE TEETH: 26 Tooth Configuration Enables Fast Efficient Cuts
- NO HEAT & NO BURRS: Usually cutting through steel would leave the material hot, with an imperfect finish, but not when using Evolution's multi-material blades. No coolant required
- VIRTUALLY NO SPARKS: Using an alternative solution such as abrasives can see you face safety concerns such as breaking mid-cut & hot ignitible sparks. This isn't an issue with Evolution blades
- MULTI-MATERIAL: Easily cuts mild steel, aluminium, plastic, laminates, decking, wood and even reclaimed wood with embedded nails
- SIZE: 230mm (9") Diameter and 25.4mm (1") Bore
- HIGH GRADE CARBIDE TEETH: 26 Tooth Configuration Enables Fast Efficient Cuts
- NO HEAT & NO BURRS: Usually cutting through steel would leave the material hot, with an imperfect finish, but not when using Evolution's multi-material blades. No coolant required
- VIRTUALLY NO SPARKS: Using an alternative solution such as abrasives can see you face safety concerns such as breaking mid-cut & hot ignitible sparks. This isn't an issue with Evolution blades
