CRC 3306 Lecithin Mold Release, 12 oz Aerosol Can, Clear;

CRC Lecithin Mold Release is suitable for most applications where post-mold parts will be painted, stenciled, glued, bonded, laminated, hot-stamped or metalized. This product is a food-approved, vegetable based, non-silicone mold release. The rapid dry, anti-stick formula is suitable for cold and hot molds. CRC Lecithin Mold Release prevents sticking, which increases the life of dies and molds, improves product surface finishes and reduces production times. Excellent for use in injection and compression molding of ABS, acetal, acrylic, nylon, polycarbonate, polyethylene, polypropylene, polystyrene, polysulfone, and rubber. Also for use on plastic wrap equipment, gaskets and seals. Prevents sticking to increase the life of dies and molds, improve product surface finishes and reduce production times. Rapid dry, anti-stick mold release agent suitable for cold and hot molds. Vegetable-based Lecithin is a non-silicone, food approved release. Completely Compatible with secondary operations where parts must be painted, stenciled, glued, bonded, laminated, hot stamped or metalized. (No special cleaning required before part decoration.) 3-1/2 percent Solids provide excellent general purpose lubrication up to 500 degrees F. Colorless, Odorless, non-staining and non-corrosive. Meets FDA Regulation 21 CFR 175.300 (release agent). Meets 1998 USDA Guidelines for use in meat and poultry plants.