The innovative Drive Shaft Clamping Center Support (DSCCS) is the only true Permanent fix to bearing support failures. This Patented device was developed by our team of technicians whom over the course of 2 years were able t...

Buy Now From Amazon

The innovative Drive Shaft Clamping Center Support (DSCCS) is the only true Permanent fix to bearing support failures. This Patented device was developed by our team of technicians whom over the course of 2 years were able to create what is now the end-all solution to failing Bearing Supports. The DSCCS is the ONLY device that can be installed without removing the Drive Shaft from the vehicle or without requiring the disassembly of the Drive Shaft. Why is this so important? 1) By not having to disassemble the Drive Shaft means that NO re-balancing of the shaft is required. All other methods of Bearing Support replacement require this expensive and lengthy procedure. Failure to balance the once disassembled Drive Shaft would result in major vibrations. 2) Our DDCCS installs easily to your Drive Shaft, using basic household tools, in less than an hour. This is a DIY repair that will save you costly repair bills and time down. If you choose to have a pro install it, the labor times will be much less than Drive Shaft replacement. The cause of the premature Drive Shaft Support failure is a direct result of too much continuous stress imposed upon the rubber in the mount. This is more the product of the Drive Shaft design than the quality of the rubber material in the mount. Unfortunately, by merely replacing the Bearing Support with another similar rubber mount you can expect much of the same results experienced with the factory rubber mount. There is only One certain and definite fix. The EPS DSCCS support takes a completely different approach in solving this problem. Getting away from the proven failure-prone solid rubber vibration dampener, we instead use multiple, hollow Silicone Pods. This design is much better equipped to withstand the constant compressing and stretching forces generated while in use. The silicone material also does a much better job of handling the heat and atmospheric conditions located under your vehicle.

  • Permanently repairs the notorious bearing support - 2003-2010
  • DIY installation - typically in under one hour using household tools
  • No need to remove or disassemble your current Drive Shaft
  • No need to re-balance your Drive Shaft
  • **NOTE** If this support is too small to fit your bearing then you have an aftermarket shaft. You will need to remove the thin sheathing around your bearing prior to installing clamping support.
  • Permanently repairs the notorious bearing support - 2003-2010
  • DIY installation - typically in under one hour using household tools
  • No need to remove or disassemble your current Drive Shaft
  • No need to re-balance your Drive Shaft
  • **NOTE** If this support is too small to fit your bearing then you have an aftermarket shaft. You will need to remove the thin sheathing around your bearing prior to installing clamping support.

Similar Products

Valvoline Moly-Fortified Gray Full Synthetic Grease 14.1 OZ CartridgeMann-Filter C 39 219 Air FilterBosch C3861WS / F00E369740 Carbon Activated Workshop Cabin Air Filter For 2007-2015 Audi Q7, 2003-2006, 2008-2018 Porsche Cayenne, 2004-2017 Volkswagen Touareg2 wipers Factory For Porsche Cayenne 2003-2006 Volkswagen Touareg 2004-2007 Original Equipment Replacement Wiper Blade Set - 26URO Parts 7L0907637 Brake Pad SensorMann-Filter HU 719/5 X Metal-Free Oil FilterValvoline Moly-Fortified Gray Full Synthetic Grease 1 LBURO Parts 7L0907637C Brake Pad Sensor