Interlux YBA064A/16 Trilux 33 Aerosol Antifouling Paint - Gray, 16 oz.;

Interlux Trilux Boat Prop & Drive Antifouling Spray PaintTrilux Prop and Drive Aerosol is the highest performance aerosol antifouling available. It has been formulated specifically for aluminum outboards, outdrives and can be used on all underwater metals. Trilux utilizes Interlux's Biolux technology. Biolux technology is a unique system consisting of organic boosting biocides that are incorporated in a high effective controlled release film to deter slime. Prime bare metal with Primocon. New formulation provides effective antifouling in a convenient aerosol Biolux technology reduces slime and increases antifouling performance For all outdrive and underwater metal Sold in 12 oz. aerosol can Available in 3 colors: Black (ILX-YBA063A Gray (ILX-YBA064A) White (ILX-YBA068A)Specifications: Finish: Matte Coverage (approx): 21.2 ft²/gal Number of Coats: 2It is important that you shake can well before use. If can is not shaken properly, clogging of the tip may occur. ***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY*** How To ApplyAPPLICATION DATA METHOD: Aerosol can NUMBER OF COATS: 2 Use an entire can of Trilux Prop & Drive Aerosol per lower unit. DRY FILM THICKNESS PER COAT: 2 milsCOVERAGE: 1 aerosol can will cover 1 lower unit (2 coats) APPLICATION TEMP: 50F Min. / 95F Max.DRY TIMES:TempTo TouchTo RecoatTo Launch95F1/2 HR4 HR8 HR73F1/2 HR6 HR12 HR50F1/2 HR12 HR16 HRPREVIOUSLY PAINTED SURFACES: with Trilux Prop & Drive Aerosol Sand with 80 grade (grit) paper. with Factory Finish or Antifouling Paint Sand with 80 grade (grit) paper. Clean with Special Thinner 216. Re-sand any areas where bare aluminum is exposed with medium grade (grit) emery cloth and wipe clean. Follow procedure for bare aluminum above. BARE ALUMINUM: For Black, White and Gray - Sand with medium grade (grit) emery cloth to a bright metal finish. Immediately apply VinyLux Primewash 353/354 thinned 25% with Viny-Lux Solvent 355. Allow to dry for 1-24 hours. Apply 1 full