High Lifter 3" Suspension Lift Kit for Polaris Ranger 700/800 ATV (2009-2014), PLK800R-50;

3" Lift Kit Features:

- All hardware needed for successful installation

- User-friendly instructions

- Bolt-on application; takes approximately 1-2 hours for install

-Zinc plated

- Front and rear lift

- Clear-coated High Lifter name plate

High Lifter's Steering Stops (RANGER-SSK) are a must-have for Ranger Lift Kit owners. The Steering Stops helps reduce the turn radius and can help prevent breaking an axle. Click HERE to add a set of Steering Stops to your order today!

Fits:

Polaris 500 EFI Ranger (09-10)

Polaris 700 EFI Ranger XP and; HD IRS (2009; will not fit 2009 700 Crew)

Polaris 800 EFI Ranger XP, HD IRS (10-12)

Polaris 800 Ranger Crew IRS (10-12)

Notes:

1.5" spacers are recommended, but a MINIMUM of a 1" wheel spacer is required on the front if you are running 12" diameter factory or aftermarket wheels for the wheel to clear the tie rod with the alignment cones installed. If you are running wide tires a 1.5" or wider spacer may be required depending on the width of the tire for tire to shock clearance at full lock steering.

New Rear High Lifter Pro Series Axles or Gorilla CV Axles are recommended for the 2011-2012 Ranger models before installing ANY brand of lift kit. The 2011-2012 model rangers have lighter duty rear axles than previous year models and are more prone to breakage.

High Lifter's Pro Series Alignment Kit (PSAK-1) is REQUIRED if you own or are buying PLK800R-50 or ANY brand of Ranger lift kit and have updgraded or are upgrading to the Pro Series Ranger Tie Rod/Rack End Kit. This kit also upgrades from the OEM 10mm bolt to a 1/2" Gr. 8 bolt to match the heavy duty heim joint in our Tie Rod/Rack End Kit. The alignment kit comes with 2 alignment cones and all hardwared required to upgrade both sides of the Ranger.