Anderson Metals 54040 Brass Tube Fitting, Cap, 3/8" Tube OD;
Anderson Metals 54040 Brass Tube Fitting, Cap, 3/8

Two piece construction - nut and body. Use with brass tubing. Standard fittings use short nuts. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. -65 degree F to +2...

Buy Now From Amazon

Two piece construction - nut and body. Use with brass tubing. Standard fittings use short nuts. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. -65 degree F to +250 degree F temperature range. Primary uses fuel equipment, plumbing, gases, refrigeration and vacuum. 5/8"-18 Thread size.

  • Two piece construction - nut and body
  • Use with brass tubing
  • Standard fittings use short nuts
  • Resists mechanical pullout
  • Easy to disassemble and can be reassembled many times with no effect on the seal
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
  • Two piece construction - nut and body
  • Use with brass tubing
  • Standard fittings use short nuts
  • Resists mechanical pullout
  • Easy to disassemble and can be reassembled many times with no effect on the seal
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Similar Products

Anderson Metals 56108 Brass Pipe Fitting, Cap, 3/8LASCO 06-9111 Angle Stop Add-A-Tee Valve, 3/8-Inch Compression Inlet X 3/8-Inch Compression Outlet X 3/8-Inch Compression Outlet, BrassAnderson Metals 50062 Brass Compression Tube Fitting, Union, 3/8Watts LFA-5 Compression Cap, 1/4-Inch