Revere Ware Pan/skillet 2-screw Handle Replacement Hardware Set (Small Handles) (Two Sets);

PLEASE DO NOT ORDER THIS HANDLE SIZE UNLESS YOU ARE SURE IT WILL FIT YOUR HANDLE! THIS HARDWARE SET ONLY WORKS ON THE SMALL HANDLE SIZE WHICH VERY FEW PANS ACTUALLY HAVE.

These are replacement screws, nuts, and hanging loops for the smallest size vintage era (two screw type) Revere Ware pan handles. These parts are newly manufactured and are made to look and work just like original Revere Ware hardware, with the exceptions noted below.

Material: Stainless steel

Includes: Two nuts, two screws, and a hanging hook

Measurements: Screws are .35 inches (9.5 mm) long including head. Barrel nuts are .5 inches (13 mm) long including head. The hook is slightly smaller than the similar hardware set made for medium, large, and x-large 2-screw vintage Revere Ware handles to make it easier to crimp on.

Fits: Vintage era small Revere Ware pan handles (i.e. for 6 inch skillets). These fit Revere Ware pans with handles that have two screws through the Bakelite.

These will only work with the small two-screw vintage style handle. These screws and nuts will not fit in the larger handle sizes or the single screw newer handle.

Replaces: The original Revere part number for the screw/nut/washer set was 36079 and for the hanging loop was 2501.

Hardware Notes
The screws in the hardware set are Phillips head, not slotted like the original Revere Ware screw sets were. Because the original slot head screws strip very easily, we consider this an improvement.

Note that we are selling these in pairs of two sets, to help reduce the shipping cost per single item.