Savox SC-0251 High Torque Metal Gear Larger than Standard Digital Servo;

Dimensions(mm): 40.7X19.6X42.4
Weight(g): 61.0
Speed(@4.8V sec/60): .20
Torque(@4.8V oz-in): 180.5
Speed(@6.0V sec/60): .18
Torque(@6.0V oz-in): 222.2
Gear: Metal
Bearing: 2BB
Case: Plastic
25 Tooth Spline
Frequency: 200-250hz
Pulse Width Frequency: 1520
Operating Temperature Range (C) -10-50
Operating Voltage Range (V): 4.5-7.2
Running current (at no load): 300 mA @ 4.8V
Running current (at no load): 350 mA @ 6.0V
Stall current (at locked): 2600 mA @ 4.8V
Stall current (at locked): 3200 mA @ 6.0V
Idle current (at stopped): 5 mA @ 4.8V
Idle current (at stopped): 6 mA @ 6.0V
Limit angle: 180°±10°
Connector wire gauge: ＃22 AWG
Connector wire length: 300 ±5 mm
Horn gear spline: 25T
Control system: Pulse width modification
Amplifier type: Digital Controller
Operating Trave: 120° (when 1000→2000 μsec)
Neutral position: 1500 μsec
Dead band width: 5 μsec
Rotating direction: Counterclockwise (when 1500→2000 μsec)
Pulse width range: 800→2200 μsec
Maximum travel: Approx 164° (when 800→2200 μsec)