Lights of America 30w Conversion Kit;

If you have a Lights of America 30 watt fixture for whichThe ballast has failed,This conversion kit will allow you to replaceThe ballast/lamp unit without having to replaceThe entire fixture. To install, turn offThe power toThe fixture (turn offThe switch andThe circuit breaker). LoosenThe screws inside your existing fixture that holdThe ballast/lamp holder in place. Loosen and removeThe wire nuts, and removeThe existing ballast/lamp holder. ReattachThe wires (black to black and white to white) toThe conversion kit using your existing wire nuts, line upThe mounting holes ofThe conversion kit withThe securing screws insideThe fixture, and tighten. WhileThese steps are relatively simple for a skilled do-it-yourselfer, and will permit continued use of a fixture for whichThe original ballast has failed, it would be prudent for anyone uncomfortable working with electricity to hire an electrician forThis type of project. Note thatThis kit is not suitable for use in fixtures that use lamps other thanThe LOA 30 watt circular lamp. Power Requirements: 120 volts AC, 60 Hz Power Consumption: 30 watts, 0.4 amps Dimensions: 2.7" Deep x 8.8" Diameter