Tenergy TB6-B 50W Balancing Charger for NiMH/NiCD/Li-PO/Li-Fe/SLA Battery Packs;

The Best ALL-IN-One Universal Charger in the Market
Supports multiple types of battery packs with one single charger!

The follow packs are supported:
NiMH/NiCD 1~15 series (1.2v to 18v)
Li-PO/Lithium Ion 1~6 series (3.7v to 22.2v)
Li-Fe 1~6 series (3.2v to 19.2v)
Sealed Lead Acid (SLA) (2v to 20v)

Charger Specifications:
Handle NiMH, NICD, Li-Po,Li-ion, Li-Fe, SLA Batteries
DC 11V~15V, which can be directly connect to Automobile Battery. The working electric current is less than 5A when it is charged in full load. The current of the fuse is 10A which could prevent short circuit.

Charger Features:
- 'AUTO' function sets the feeding current or the cell count of the battery automatically. Can prevent the over-charging for Li-ion/Li-Polymer batteries. Every program in the unit is controlled with mutual links and communication for possible error
- TB6 also can monitor and balance individual cells of the battery pack during the discharge process. If the voltage of any one cell varies abnormally, the process will be stopped with the error message.
- Charge Li-ion/Li-Polymer for special purposes. "Fast" reduces charging time/"Storage" controls the final voltage of battery to be suit for long time storage
- Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing/balancing.

IMPORTANT CHARGING WARNING
-BEFORE CHARGING ALWAYS INSPECT BATTERIES for any type of damages to both the wire(s) and battery pack (punctures, pvc damage, and/or battery swelling). DO NOT Charge if the pack has any of the mentioned issues!
-ALWAYS BALANCE-CHARGE RC/Hobby/Airsoft LIPO BATTERY PACKS: when charging any of these LiPO packs, ALWAYS use the balance charge mode & use the balance connector/board.
*Ignoring these WARNINGS could result in fire or personal/property damages *