36 db High Performance VHF / UHF / FM / HDTV Signal Amplifier - Great for Cable TV;

Installation steps:1-Connect amplifier as per this diagram. 2-This amplifier can not be used with TiVo. 3-Performance varies from one location to another. 4-Adjusting the gain control clockwise increases your signal strength. 5-In most cases the FM trap should be set to the IN position. ● Switchable FM Trap ● 75 OHM Input ● 75 OHM Output ● 117V Power Source ● Lightning Protection ● Heavy Metal Case ● Low Noise ● Integrated Circuit ● Gain db ● 40 VHF- 36 UHF ● Noise Figure db ● Low 5.4- Hight 6.2-UHF 14 ● FM Trap Attenuation-20 db 95-108 MHz ● Adjustable Gain control Installation instructions: 1.Connect coaxial cable from antenna/ cable to amplifier input. 2.Connect coaxial cable form output to TV set. 3.If connecting more than one TV, use a splitter between amplifier output and TV. 4.Use gain control to increase signal (turn clockwise) or reduce signal (turn counter clockwise). 5.FM trap is used to eliminate FM interference. In most cases slide switch to (IN) position. 6.Red light indicates that the amplifier is plugged into 110 volt outlet. 7.Amplifier performance varies from one location to another. 8.This amplifier generally WILL NOT WORK WITH TIVO. 9.Check the back of amplifier package for specifications and installation diagram. 10. Works with cable modems. 11. Amplifies indoor/outdoor antenna and cable signals for best reception.