HYDRO BARRIER is a thin, load bearing, self curing liquid rubber polymer which can be easily applied to form a flexible seamless waterproof/anti-fracture membrane. HYDRO BARRIER can be used on interior and exterior, horizontal or vertical surfaces and is approved by IAPMO for use as shower pan liner.
- Allows for flood testing in 24 hours. Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured. Changes in color from a light blue to darker blue when cured
- Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks. "Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test).
- Exceeds ANSI A118.10 and A118.12. IAPMO approved.
- Fast curing; allows foot traffic in 4–6 hours @ 70°F (21°C), 50% RH. Lighter color for ease of inspection. Safe—no solvents and non-flammable.
- Install tile, brick and stone directly onto membrane
- Equipped with Microban product protection
- Allows for flood testing in 24 hours. Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured. Changes in color from a light blue to darker blue when cured
- Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks. "Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test).
- Exceeds ANSI A118.10 and A118.12. IAPMO approved.
- Fast curing; allows foot traffic in 4–6 hours @ 70°F (21°C), 50% RH. Lighter color for ease of inspection. Safe—no solvents and non-flammable.
- Install tile, brick and stone directly onto membrane
- Equipped with Microban product protection
