PEMS HM-RGM451 Pellet Stove Auger Gear Motor, 1 RPM, 0.51 Amps, 120 V;

Cross reference: 4515u1-063, Whitfield quest, 93-0194, 12046300, ecm-6, v07524acd9, traditions & profile series stoves, Avalon, austroflamm Bracewell, merkle-korff, national steel crafters, Lennox hearth 6216, earth stove, envirofire, lopi, pellet master r7-rgm451, v08038aa09, 6216, car003, 6807, v0752acd9. 1 year manufacture warranty. If you need ccw rotation: You would remove the 3 or 4 screws that hold the motor to the gear box. 2 of the screws go thru the bearing housing, you remove those leaving the shaft/rotor in place. Turn the motor coil around and reassemble. This is an aftermarket replacement motor. Below are the instructions for properly reversing the direction of the motor. Reversing rotation to counter clockwise facing the shaft: A.) Hold auger motor in your hand with motor side facing you. B.) Remove 2 silver screws holding the bearing cap. C.) Remove bearing cap. D.) Remove the silver bolt(s) holding the black magnet in place. (There may be one or two depending on production) e.) Remove black magnet, flip it over, and place back onto motor. (Do not flip the shaft, only the black magnet) f.) Reinstall silver bolt(s) on magnet. G.) Reinstall bearing cap. Reinstall last two silver screws.