Create a weatherproof bulkhead/panel mount SAE power point. Connector body fits a 1″/25mm drilled hole. Rubber expander bushing secures the connector in the hole!
- 𝗦𝗜𝗠𝗣𝗟𝗘 - Easy mounting. Drill the hole, fit the socket, tighten the nut.
- 𝗠𝗔𝗞𝗘𝗦 𝗖𝗢𝗡𝗡𝗘𝗖𝗧𝗜𝗡𝗚 𝗧𝗢 𝗬𝗢𝗨𝗥 𝗕𝗔𝗧𝗧𝗘𝗥𝗬 𝗘𝗔𝗦𝗜𝗘𝗥 - Easy access to fixed SAE power port.
- 𝗦𝗔𝗙𝗘 - Weatherproof sealed SAE cap, and wiring.
- 𝗪𝗢𝗥𝗞𝗦 𝗪𝗜𝗧𝗛 𝗔𝗡𝗬 𝗩𝗘𝗛𝗜𝗖𝗟𝗘 - Connect to an existing SAE or use together with O-01 to mount to any battery/vehicle.
- 𝗪𝗢𝗥𝗞𝗦 𝗪𝗜𝗧𝗛 𝗔𝗟𝗟 𝗢𝗣𝗧𝗜𝗠𝗔𝗧𝗘 𝗖𝗛𝗔𝗥𝗚𝗘𝗥𝗦!
- 𝗛𝗜𝗚𝗛𝗟𝗬 𝗗𝗨𝗥𝗔𝗕𝗟𝗘 - Cable rated for use from 60°C / 140°F down to -40°C/-40°F – Remains Flexible below freezing!
- 𝗦𝗜𝗠𝗣𝗟𝗘 - Easy mounting. Drill the hole, fit the socket, tighten the nut.
- 𝗠𝗔𝗞𝗘𝗦 𝗖𝗢𝗡𝗡𝗘𝗖𝗧𝗜𝗡𝗚 𝗧𝗢 𝗬𝗢𝗨𝗥 𝗕𝗔𝗧𝗧𝗘𝗥𝗬 𝗘𝗔𝗦𝗜𝗘𝗥 - Easy access to fixed SAE power port.
- 𝗦𝗔𝗙𝗘 - Weatherproof sealed SAE cap, and wiring.
- 𝗪𝗢𝗥𝗞𝗦 𝗪𝗜𝗧𝗛 𝗔𝗡𝗬 𝗩𝗘𝗛𝗜𝗖𝗟𝗘 - Connect to an existing SAE or use together with O-01 to mount to any battery/vehicle.
- 𝗪𝗢𝗥𝗞𝗦 𝗪𝗜𝗧𝗛 𝗔𝗟𝗟 𝗢𝗣𝗧𝗜𝗠𝗔𝗧𝗘 𝗖𝗛𝗔𝗥𝗚𝗘𝗥𝗦!
- 𝗛𝗜𝗚𝗛𝗟𝗬 𝗗𝗨𝗥𝗔𝗕𝗟𝗘 - Cable rated for use from 60°C / 140°F down to -40°C/-40°F – Remains Flexible below freezing!
