Kreg PRS4275 Profile #6 Router Bit 3/8-Inch Specialty Bead Cutter;

This 3/8 beaded bit requires a 3/8 deep notch that is only achieved with the 3/8 notching bit. Two different profiles are available for these notching bits; 3/8 x 1-1/2 for rails and stiles that are a minimum of 1-1/2 wide, 3/8 x 2 for rails and stiles that are a minimum of 2 wide. For rails and stiles wider than the minimum, multiple passes will be required. For each beaded profile, both a beading bit and a notching bit are needed.