Shields low permeation marine fuel Hose has a plastic barrier veneer with an NBR outer layer tube to prevent permeation. This polyester reinforced Hose Complies with EPA and CARB very low permeation requirements and is weather/UV resistant. This Hose is primarily used for fuel feed (gasoline up to 85% ethanol blended fuels/diesel/all bio-diesel blends). it meets USCG type A1 - 15 requirements for pleasure boats and meets sae J1527 type A1-15, ISO 7840 type A1, and NMMA/CE type accepted standards. The temperature ranges from -20 DegreeF to 212 DegreeF.
- I.D.: 3/8" or 9.5mm, o.D.: 11/16" or 17.27mm, wt. "C": 16, max WP: 100
- Has a plastic barrier Veneer with an NBR outer layer tube to prevent permeation. The temperature ranges from -20 DegreeF to 212 DegreeF
- Reinforced hose complies w/epa & carb very low permeation Requirements & is weather/UV resistant
- Primarily used for fuel Feed (gasoline up to 85% ethanol blended fuels/diesel/all bio-diesel blends)
- Meets USCG type a1-15 Requirements for pleasure boats. Meets Saej1527 type a1-15 ISO 7840 type A1 and NMMA/CE type accepted standards
- I.D.: 3/8" or 9.5mm, o.D.: 11/16" or 17.27mm, wt. "C": 16, max WP: 100
- Has a plastic barrier Veneer with an NBR outer layer tube to prevent permeation. The temperature ranges from -20 DegreeF to 212 DegreeF
- Reinforced hose complies w/epa & carb very low permeation Requirements & is weather/UV resistant
- Primarily used for fuel Feed (gasoline up to 85% ethanol blended fuels/diesel/all bio-diesel blends)
- Meets USCG type a1-15 Requirements for pleasure boats. Meets Saej1527 type a1-15 ISO 7840 type A1 and NMMA/CE type accepted standards
