Champion Double Platinum Power spark plugs deliver more powerful performance. Featuring exclusive Heat-Active alloy, a platinum fine wire center electrode and a platinum pad ground electrode, spark plugs reach optimal tem...

Buy Now From Amazon

Champion Double Platinum Power spark plugs deliver more powerful performance. Featuring exclusive Heat-Active alloy, a platinum fine wire center electrode and a platinum pad ground electrode, spark plugs reach optimal temperatures quickly and maintain stable operating temperature under all engine loads, while providing maximum life and sharper spark focus.

Step-by-Step Instructions for Installing New Spark Plugs

Step 1
If necessary, set the gap on the new spark plug before installing it. In the past, it was necessary to use a gapping tool to make sure the gap in the spark plugs was the correct size. Today, Champion spark plugs come pre gapped, eliminating the need for this step most times. You should double check that the gap is correctly set; check your owner€s manual to find the distance for the spark plug gap and use a gap gauge or feeler gauge to check the distance.

Step 2
Seat the new spark plug by hand; turning it clockwise at least two full turns. Once you have the spark plug snug, use the socket wrench with extension and spark plug socket to tighten it turning the plug clockwise. The plug€s washer should be pressed against the mounting surface.  
Take care not to over tighten the plug; you can strip the thread on the head of the engine leading to costly repairs. You can also use a torque wrench to torque it to specification (OE service or repair manual).

Step 3
Replace the spark plug wire boot or ignition coil and wiring connector. A plastic boot should click into place while a rubber boot may require a coat of dielectric grease on the inside of the boot for easy removal next time.

Step 4
Repeat the removal and installation process for each spark plug. That€s all there is to it! If at any point you run into issues or have a question, consult your mechanic.

These instructions are for informational purposes only and should not be used in lieu of seeking professional advice from a certified technician. We encourage you to consult with a certified technician if you have specific questions or concerns relating to any of the topics covered herein.



  • Copper Plus - Dependable Performance and Durability
  • Copper core center electrode allows for accurate control of heat range for longer life
  • Inhibits corrosion
  • Built to ISO and SAE standards for proven performance
  • Copper Plus - Dependable Performance and Durability
  • Copper core center electrode allows for accurate control of heat range for longer life
  • Inhibits corrosion
  • Built to ISO and SAE standards for proven performance

Similar Products

Ignition Coil for Jeep Dodge Mitsubishi 4.7L 3.7L Compatible with C1231DWVO Ignition Coil Pack of 8 for Dodge Ram Dakota Durango Nitro - Jeep Cherokee Commander - Mitsubishi Raider V8 3.7L 4.7LFRAM FV408 Positive Crankcase Ventilation PCV ValvePermatex 22058 Dielectric Tune-Up Grease, 3 oz. TubeIgnition Coil Pack of 8 for Dodge Ram 1500 - Dakota - Durango - Nitro - Jeep Grand Cherokee - Commander - Liberty - Mitsubishi Raider - V8 3.7L 4.7LECCPP Ignition Coil, Ignition Coil Packs Replacement Coils C1231 5C1114 UF-270 UF-297 UF-399 for Jeep Dodge Mitsubishi 1999-2008(Pack of 8)ACDelco 252-813 Professional Water Pump KitGenuine Chrysler Accessories (5016796AC) NV 245/247/249 Transfer Case Lubricant - 1 Quart