This Pentek DGD-5005 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has two separate g...

Buy Now From Amazon

This Pentek DGD-5005 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 50 microns, and the rating of the post-filter layer is 5 microns. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.

Specifications

Nominal filtration rating (pre-filter)50 microns
Nominal filtration rating (post-filter)5 microns
Initial pressure drop at 10 gpm<1 psi
Temperature range40 to 145 degrees F (4.4 to 62.8 degrees C)
Maximum dimensions (H x W)10 x 4-1/2 inches (254 x 114 mm)
Materials certificationNSF/ANSI standard 42

The nominal filtration rating is for a particle removal efficiency of 85%.

H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.

Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.



  • KEEP YOUR WATER CLEAN and protect your appliances by removing dirt, sand, silt and particulates. DGD Big Blue water filter cartridges are designed for purity and will NOT impart taste, odor or color to your water
  • IDEAL HIGH-FLOW PRE-FILTER. Filter density increases toward the cartridge's center resulting in superior particulate reduction and 3X the dirt holding capacity of similar size sediment cartridges
  • TESTED AND CERTIFIED BY NSF INTERNATIONAL to NSF/ANSI Standard 42 for your peace of mind. Manufactured with 100% pure polypropylene
  • SIZED FOR USE IN ALL 10 inch Big Blue filter housings (or other heavy duty filter housings) and can replace any 10 inch x 4.5 inch sediment filter cartridge
  • REPLACE EVERY 6 MONTHS or when you notice a drop in water pressure or water quality for best results and performance
  • KEEP YOUR WATER CLEAN and protect your appliances by removing dirt, sand, silt and particulates. DGD Big Blue water filter cartridges are designed for purity and will NOT impart taste, odor or color to your water
  • IDEAL HIGH-FLOW PRE-FILTER. Filter density increases toward the cartridge's center resulting in superior particulate reduction and 3X the dirt holding capacity of similar size sediment cartridges
  • TESTED AND CERTIFIED BY NSF INTERNATIONAL to NSF/ANSI Standard 42 for your peace of mind. Manufactured with 100% pure polypropylene
  • SIZED FOR USE IN ALL 10 inch Big Blue filter housings (or other heavy duty filter housings) and can replace any 10 inch x 4.5 inch sediment filter cartridge
  • REPLACE EVERY 6 MONTHS or when you notice a drop in water pressure or water quality for best results and performance

Similar Products

Pentek 151122 OR-100 Buna-N O-ring for Big Blue HousingsPentek DGD-2501 Spun Polypropylene Filter Cartridge, 10Pentek GAC-BB Drinking Water Filter (9-3/4Pentek EP-BB Carbon Block Filter Cartridge, 9-3/4Pentek CFB-PLUS10BB Fibredyne Modified Carbon Block 5 m FilterPentek 150296 SW-3 Wrench for #10 Big Blue HousingsCaptain O-Ring - Pentek, Pentair Water 151122 Replacement for OEM Size Big Blue O-Ring Buna-N ORing (3 Pack)