Woodhaven 781 Inch Shelf Pin Jig
- 781 has 15 holes spaced 1" on center and 1-1/2" from the edge. Can be used to make 5mm or 1/4" shelf pin holes with appropriate bit. This jigs compact size lets you use it in the tightest quarters.
- Lets you rout or drill either 5mm or 1/4" shelf pin holes. Drilling is easiest if your cabinet is assembled. Routing is faster and produces a slightly cleaner/squarer hole on unassembled parts.
- Jig accepts 3/8" OD self-centering drills (NOT INCLUDED), or a guide bushing & router bit (NOT INCLUDED)
- Made of tough 7mm (0.262") thick phenolic. Thicker and stronger than Acrylic templates
- Lifetime guarantee against defects in material or workmanship. Made in the USA!
- 781 has 15 holes spaced 1" on center and 1-1/2" from the edge. Can be used to make 5mm or 1/4" shelf pin holes with appropriate bit. This jigs compact size lets you use it in the tightest quarters.
- Lets you rout or drill either 5mm or 1/4" shelf pin holes. Drilling is easiest if your cabinet is assembled. Routing is faster and produces a slightly cleaner/squarer hole on unassembled parts.
- Jig accepts 3/8" OD self-centering drills (NOT INCLUDED), or a guide bushing & router bit (NOT INCLUDED)
- Made of tough 7mm (0.262") thick phenolic. Thicker and stronger than Acrylic templates
- Lifetime guarantee against defects in material or workmanship. Made in the USA!
