Woodhaven 782 Metric Shelf Pin Jig
- 782 has 12 holes spaced 32mm on center and 37mm from the edge. Can be used to make 5mm or 1/4" shelf pin holes with appropriate bit.This jigs compact size lets you use it in the tightest quarters.
- Lets you rout or drill either 5mm or 1/4" shelf pin holes. Drilling is easiest if your cabinet is assembled. Routing is faster and produces a slightly cleaner/squarer hole on unassembled parts.
- Jig accepts 3/8" OD self-centering drills (order separately), or a guide bushing & router bit (order separately).
- Made of tough 1/4" thick phenolic. Get our 5mm (761N nickel) or 1/4" (762B brass) shelf pins to finish the job.
- Lifetime guarantee against defects in material or workmanship. Made in the USA!
- 782 has 12 holes spaced 32mm on center and 37mm from the edge. Can be used to make 5mm or 1/4" shelf pin holes with appropriate bit.This jigs compact size lets you use it in the tightest quarters.
- Lets you rout or drill either 5mm or 1/4" shelf pin holes. Drilling is easiest if your cabinet is assembled. Routing is faster and produces a slightly cleaner/squarer hole on unassembled parts.
- Jig accepts 3/8" OD self-centering drills (order separately), or a guide bushing & router bit (order separately).
- Made of tough 1/4" thick phenolic. Get our 5mm (761N nickel) or 1/4" (762B brass) shelf pins to finish the job.
- Lifetime guarantee against defects in material or workmanship. Made in the USA!
