Tight miter joints are a hallmark of fine woodworking, and this bit will cut them in spades. Once cut, the miters interlock mechanically, and clamping is easy since the parts can't slide around. There is also more gluing area, so the joint is stronger than a straight miter. Machining parts with the Lock Miter Bit is easy-with the bit height set, one part is cut horizontally on the router table, while the corresponding part is cut vertically. The bit is ideal for joining drawer boxes, cabinet parts, and for building 4-sided columns. To make setting the cutter height easy and fool-proof, use the Rockler Router Bit Set-up Jig (53817, sold separately) to center the bit on your stock.
- 450 Miter Lock Router Bit: Angular miter lock bit helps provide a strong mechanical locking action for a well-clamped lock miter joint.
- Designed To Work With? 45 miter router bit works with 2" x 3-7/8" x 3/4" set up jigs. Rockler router bit set up jig is sold separately.
- High-Quality Material: Our lock miter router bit jig has been sharpened with 600-800 grit diamond wheels. Measuring 1-3/4" D x 3/4" H x 1/2" shank, this lock miter bit has an anti-stick coating to reduce pitch & resin buildup.
- Save Your Time: Quickly and easily save your time for creating a 45° lock miter joint jig. Precise Machined Setup aid and no test cuts required, this woodworking jig helps create a strong & perfectly aligned joint corner. Make life easier!
- Keep Hands Clear of Bit: Use these jig woodworking tools only in a table-mounted router at a lower speed. Do not bottom out a bit in your router collet. Allow at least a 1/8" gap between the bottom of the bit shank and the bottom of the router collet. Keep hands clear of bit.
- 450 Miter Lock Router Bit: Angular miter lock bit helps provide a strong mechanical locking action for a well-clamped lock miter joint.
- Designed To Work With? 45 miter router bit works with 2" x 3-7/8" x 3/4" set up jigs. Rockler router bit set up jig is sold separately.
- High-Quality Material: Our lock miter router bit jig has been sharpened with 600-800 grit diamond wheels. Measuring 1-3/4" D x 3/4" H x 1/2" shank, this lock miter bit has an anti-stick coating to reduce pitch & resin buildup.
- Save Your Time: Quickly and easily save your time for creating a 45° lock miter joint jig. Precise Machined Setup aid and no test cuts required, this woodworking jig helps create a strong & perfectly aligned joint corner. Make life easier!
- Keep Hands Clear of Bit: Use these jig woodworking tools only in a table-mounted router at a lower speed. Do not bottom out a bit in your router collet. Allow at least a 1/8" gap between the bottom of the bit shank and the bottom of the router collet. Keep hands clear of bit.
