A modern formulation, DRYLOK Etch is highly effective in etching masonry, stone, tile, and brick. It removes unsightly efflorescence (salt deposits) as well as excess mortar. Use DRYLOK Etch, as a safer alternative to muriatic acid, to treat smooth concrete and condition galvanized surfaces prior to painting.
- MASONRY ETCH & CLEANER - Highly effective in etching. It removes unsightly efflorescence (salt deposits) as well as excess mortar.
- USE - It is perfect for treating smooth concrete and condition galvanized surfaces prior to painting.
- COVERAGE - 300 square feet per 12 ounce container when used as a cleaner. 150 square feet per 12 ounce container when used as an etch.
- IDEAL - For removing efflorescence and excess mortar build-up on tile, galvanized metal, stone, concrete and brick
- SURFACES - Concrete, walkways, patios, garage floors, basements, driveways, carports, concrete tennis courts, brick, stucco, concrete walls, galvanized metal, ceramic tile
- PREPARATION - Remove dirt, dust, grease and oil by washing with a detergent solution*. Allow the surface to dry before applying
- APPLICATION - Etch with a stiff bristle brush and make sure the areas stay wet during the process
- MASONRY ETCH & CLEANER - Highly effective in etching. It removes unsightly efflorescence (salt deposits) as well as excess mortar.
- USE - It is perfect for treating smooth concrete and condition galvanized surfaces prior to painting.
- COVERAGE - 300 square feet per 12 ounce container when used as a cleaner. 150 square feet per 12 ounce container when used as an etch.
- IDEAL - For removing efflorescence and excess mortar build-up on tile, galvanized metal, stone, concrete and brick
- SURFACES - Concrete, walkways, patios, garage floors, basements, driveways, carports, concrete tennis courts, brick, stucco, concrete walls, galvanized metal, ceramic tile
- PREPARATION - Remove dirt, dust, grease and oil by washing with a detergent solution*. Allow the surface to dry before applying
- APPLICATION - Etch with a stiff bristle brush and make sure the areas stay wet during the process
