The Maestro Countdown Timer is the ideal energy-saving control for any room with an exhaust fan or light. Set the timer to turn off your fan or lights automatically after 5 to 60 minutes. Softly lit LEDs indicate the time remaining before it turns off with a one minute warning. A great application for this timer is your bathroom. Ideally, exhaust fans should run for 10 or 15 minutes after a shower to reduce mold and mildew growth. By replacing your current on/off switch with a Maestro countdown timer, your fan will automatically turn off and never be left on by mistake. You can also use the Maestro countdown timer in your garage to keep the lights on as you get into your vehicle and it will turn off automatically after you leave. Save energy by using in closets, attics, basements and other low-traffic areas to ensure the light is never left on for a long time. It works in single pole applications, where the lights or exhaust fan is controlled from one switch. You can also use this countdown timer with a companion switch (MA-AS- or MA-MSC-AS-) for multi-location applications. Coordinating Claro wallplate is sold separately.
- Rated to work with up to 150W LED bulbs
- Use the Maestro countdown fan timer switch for DC and high efficiency exhaust fans to save energy in bathrooms
- Ensure lights are never left on for a long period of time in low-traffic areas in the home such as closets, attics, basements, and garages
- Can control a 3 Amp high efficiency exhaust fan; compatible with all lighting, including 150 Watts LED, 600 Watt incandescent/halogen, magnetic and electronic low-voltage lighting
- Tap once to start timer or double tap for always on; use rocker panel to adjust countdown time anywhere from 5 to 60 minutes (5, 10, 15, 30, 45, and 60 minute settings available)
- Suggested Application: Use with a Maestro motion sensor in a bathroom so timer controls the exhaust fan and the sensor (MS-OPS2, sold separately) controls the lighting
- For multi-location and single pole applications. For multi-location switching use Maestro accessory switch (MA-AS, sold separately)
- 1 minute warning before lights/fan turn off
- Installs in 15 minutes or less; neutral wire required
- Includes (1) Maestro Countdown Timer Switch; coordinating Claro wallplate sold separately
- Rated to work with up to 150W LED bulbs
- Use the Maestro countdown fan timer switch for DC and high efficiency exhaust fans to save energy in bathrooms
- Ensure lights are never left on for a long period of time in low-traffic areas in the home such as closets, attics, basements, and garages
- Can control a 3 Amp high efficiency exhaust fan; compatible with all lighting, including 150 Watts LED, 600 Watt incandescent/halogen, magnetic and electronic low-voltage lighting
- Tap once to start timer or double tap for always on; use rocker panel to adjust countdown time anywhere from 5 to 60 minutes (5, 10, 15, 30, 45, and 60 minute settings available)
- Suggested Application: Use with a Maestro motion sensor in a bathroom so timer controls the exhaust fan and the sensor (MS-OPS2, sold separately) controls the lighting
- For multi-location and single pole applications. For multi-location switching use Maestro accessory switch (MA-AS, sold separately)
- 1 minute warning before lights/fan turn off
- Installs in 15 minutes or less; neutral wire required
- Includes (1) Maestro Countdown Timer Switch; coordinating Claro wallplate sold separately
