Loop/Sleeve Cable Connectors make it easy to secure loops when anchoring cable and they can be compressed by vise, pliers, or with a compression tool. It is suggested that the anchoring pin be at least five times the diameter of the cable and that the connector be set at a distance from the pin equal to 2.5 times the diameter of the pin. We stock sizes for cable diameters 1/16 inch or greater, plus 0.037 inches in zinc plated copper and 0.024 inches in brass for securing very fine cables.
Loop/Sleeve Cable Connectors make it easy to secure loops when anchoring cable and they can be compressed by vise, pliers, or with a compression tool. It is suggested that the anchoring pin be at least five times the diamete...
Similar Products
